 *  Executing task: nRF Connect: Flash: blinky_sample/blinky_sample (active) 

Flashing blinky_sample to blue
west flash -d c:\nrf52_projects\blinky_sample\build --domain blinky_sample --dev-id 683699997

-- west flash: rebuilding
[0/5] Performing build step for 'blinky_sample'
ninja: no work to do.
[4/5] cmd.exe /C "cd /D C:\nrf52_projects\blinky_sample\build\_sysbuild && C:\ncs\toolchains\66cdf9b75e\opt\bin\cmake.exe -E true"
-- west flash: using runner nrfutil
-- runners.nrfutil: reset after flashing requested
-- runners.nrfutil: Flashing file: C:\nrf52_projects\blinky_sample\build\merged.hex
-- runners.nrfutil: Connecting to probe
Error: One or more batch tasks failed:
 * 683699997: Device error: Setting the debug port SELECT register failed while powering up sys and debug regions (Unknown Error in J-Link DLL (error code =-1)).

   This might indicate that the debug port is unavailable. Please double-check device power supply and SWD lines, and that SWD isn't disabled (Generic)

FATAL ERROR: command exited with status 1: nrfutil --json device --x-ext-mem-config-file C:/ncs/v3.2.1/zephyr/boards/nordic/nrf52840dk/support/nrf52840dk_qspi_nrfutil_config.json x-execute-batch --bat
ch-path 'C:\nrf52_projects\blinky_sample\build\blinky_sample\zephyr\generated_nrfutil_batch.json' --serial-number 683699997