Executing task: nRF Connect: Build [incremental]: beacon_2/build 

Building beacon_2
west build --build-dir c:/Users/S3872174/Workstation/beacon_2/build c:/Users/S3872174/Workstation/beacon_2

[0/1] Re-running CMake...
Loading Zephyr default modules (Zephyr base (cached)).
-- Application: C:/Users/S3872174/Workstation/beacon_2
-- CMake version: 3.21.0
-- Cache files will be written to: C:/Users/S3872174/Workstation/zephyr/.cache
-- Zephyr version: 3.5.99 (C:/Users/S3872174/Workstation/zephyr)
-- Found west (found suitable version "1.4.0", minimum required is "0.14.0")
-- Board: BTNRF52832
-- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/66cdf9b75e/opt/zephyr-sdk)
-- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/66cdf9b75e/opt/zephyr-sdk)
-- Found BOARD.dts: C:/Users/S3872174/Workstation/CustomBoards/boards/arm/BTNRF52832/BTNRF52832.dts
-- Generated zephyr.dts: C:/Users/S3872174/Workstation/beacon_2/build/zephyr/zephyr.dts
-- Generated devicetree_generated.h: C:/Users/S3872174/Workstation/beacon_2/build/zephyr/include/generated/devicetree_generated.h
-- Including generated dts.cmake file: C:/Users/S3872174/Workstation/beacon_2/build/zephyr/dts.cmake

warning: UART_CONSOLE (defined at drivers/console/Kconfig:43) was assigned the value 'y' but got the
value 'n'. Check these unsatisfied dependencies: SERIAL (=n), SERIAL_HAS_DRIVER (=n). See
http://docs.zephyrproject.org/latest/kconfig.html#CONFIG_UART_CONSOLE and/or look up UART_CONSOLE in
the menuconfig/guiconfig interface. The Application Development Primer, Setting Configuration
Values, and Kconfig - Tips and Best Practices sections of the manual might be helpful too.

Parsing C:/Users/S3872174/Workstation/zephyr/Kconfig
Loaded configuration 'C:/Users/S3872174/Workstation/CustomBoards/boards/arm/BTNRF52832/BTNRF52832_defconfig'
Merged configuration 'C:/Users/S3872174/Workstation/beacon_2/prj.conf'
Merged configuration 'C:/Users/S3872174/Workstation/beacon_2/build/zephyr/misc/generated/extra_kconfig_options.conf'
Configuration saved to 'C:/Users/S3872174/Workstation/beacon_2/build/zephyr/.config'
Kconfig header saved to 'C:/Users/S3872174/Workstation/beacon_2/build/zephyr/include/generated/autoconf.h'
CMake Warning at C:/Users/S3872174/Workstation/zephyr/CMakeLists.txt:862 (message):
  No SOURCES given to Zephyr library: drivers__console

  Excluding target from build.


-- Configuring done
-- Generating done
-- Build files have been written to: C:/Users/S3872174/Workstation/beacon_2/build
[167/167] Linking C executable zephyr\zephyr.elf
Memory region         Used Size  Region Size  %age Used
           FLASH:       84312 B       512 KB     16.08%
             RAM:       21424 B        64 KB     32.69%
        IDT_LIST:          0 GB        32 KB      0.00%
 *  Terminal will be reused by tasks, press any key to close it. 

 *  Executing task: nRF Connect: Flash: beacon_2/build 

Flashing build to nRF52 DK
west flash -d c:\Users\S3872174\Workstation\beacon_2\build --dev-id 1050325190

-- west flash: rebuilding
ninja: no work to do.
-- west flash: using runner nrfjprog
-- runners.nrfjprog: reset after flashing requested
-- runners.nrfjprog: Flashing file: c:\Users\S3872174\Workstation\beacon_2\build\zephyr\zephyr.hex
[ ######               ]   0.000s | Erase file - Check image                                                           
[ #####                ]   0.000s | Check image validity - Initialize device info                                      
[ ##########           ]   0.000s | Check image validity - Check region 0 settings                                     
[ ###############      ]   0.000s | Check image validity - block 1 of 2                                                
[ #################### ]   0.014s | Check image validity - Finished                                                    
[ #############        ]   0.000s | Erase file - Erasing                                                               
[ ##########           ]   0.000s | Erasing non-volatile memory - block 1 of 1                                         
[ #################### ]   0.000s | Erasing non-volatile memory - Erase successful                                     
[ #################### ]   0.868s | Erase file - Done erasing                                                          
[ ######               ]   0.000s | Program file - Checking image                                                      
[ #####                ]   0.000s | Check image validity - Initialize device info                                      
[ ##########           ]   0.000s | Check image validity - Check region 0 settings                                     
[ ###############      ]   0.357s | Check image validity - block 1 of 2                                                
[ #################### ]   0.005s | Check image validity - Finished                                                    
[ #############        ]   0.000s | Program file - Programming                                                         
[ ##########           ]   0.000s | Programming image - block 1 of 1                                                   
[ #################### ]   0.000s | Programming image - Write successful                                               
[ #################### ]   1.533s | Program file - Done programming                                                    
[ ######               ]   0.000s | Verify file - Check image                                                          
[ #####                ]   0.000s | Check image validity - Initialize device info                                      
[ ##########           ]   0.000s | Check image validity - Check region 0 settings                                     
[ ###############      ]   0.908s | Check image validity - block 1 of 2                                                
[ #################### ]   0.009s | Check image validity - Finished                                                    
[ #############        ]   0.000s | Verify file - Verifying                                                            
[ ##########           ]   0.000s | Verifying image - block 1 of 1                                                     
[ #################### ]   0.000s | Verifying image - Verify successful                                                
[ #################### ]   0.571s | Verify file - Done verifying                                                       
Enabling pin reset.
Applying pin reset.
-- runners.nrfjprog: Board with serial number 1050325190 flashed successfully.
 *  Terminal will be reused by tasks, press any key to close it. 