We are seeing very high defect rate when installing this part on boards: insufficient solder, solder bridging. When we look at the pads under the microscope, we are seeing...
Hello,
We have an issue. Our device is a custom board based on the nRF9151, and we use it in Latvia. Two network providers are available for our Onomondo SIM card: one supports...
Hello,
We are developing a product based on the nRF52840. According to the blog post nRF Connect SDK gets Long-term support with version 3.4.0 , NCS v3.4.0 declares the...
Subject: Request for Optimal Battery Solution for nRF54L15 Matter End Device
Hello DevZone Team,
I am opening this ticket to identify the optimal power solution for my...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Bluetooth LE is a fantastic technology for battery powered, Internet of Things devices. However, most dev kits require tethering to a smartphone, limiting the range and usefulness to only when the user…
Serial DFU Procedure and Tips
Hi,
Some of you may need to use Serial DFU to transfer firmware from external MCU or PC.
So I am posting this blog to might help saving your time to debug and development…
If you have bookmarked pages in our Infocenter, you might have noticed that many of those links don't work anymore. This is due to major changes to the backend of the Infocenter structure that will make…
Here is a demo of a small graphics engine I designed that allows me to embark moving pictures on a nRF52832 directly in code with a reasonable occupied memory size (i can do RLE or LZ4 compression).
The…
We are introducing a webcast series to stimulate more interaction with you, Devzone users.
Joining a webcast, you’ll get to watch live technical presentations and submit your own questions for the Q&A…
I’m experimenting with an alternative library approach to implement Bluetooth LE device firmware (named Bluetoe). This already works, but is still highly experimental.
I wrote a blog article to…