Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
RX/TX buffers in S110 0

Hello, How many RX buffers are in S110 SoftDevice? I know there are 6 TX buffers (so you can send 6 packets per Connection Interval). How is it on receiving? Is it e...
- s110
- nrf51822
1219 views

0 replies

Started over 11 years ago
by Cyril Hruscak
Not Answered

How can I ensure not be Interrupted by radio when I use gpio simulate IIC? 0

My sensor is off-standard,so I have to use gpio to read and write my sensor. Gpio IIC will take about 0.5ms to get data. My app need send data every 7.5ms,it seems that...

822 views

0 replies

Started over 11 years ago
by gootoomoon
Not Answered

Service Discovery Fails on Nexus 4 Android application 0

Hi, My android Proximity application fails on service discovery only for the very first time it connects with the devices(nrf51822 evaluation kit with sdk 5.2.0). Actually...

898 views

0 replies

Started over 11 years ago
by balaji
Not Answered

Convert AN34 DTM Python script to C# 0

Has anyone converted the app note AN34 DTM Python script to C# or C/C++ ? The Python DTM script is works OK with the setup specified in the app note AN34 figure 2, which...

1529 views

0 replies

Started over 11 years ago
by Virgil Gomes
Not Answered
nrf51822 UART Lost bit 0

Hi, I have a serious problem, when I use uart of NRF51822 QFAAC0 to receive data from another MCU, I found that it will lost one bit at same position everytime. my SDK is...
- uart
- nrf51822
1460 views

0 replies

Started over 11 years ago
by Terry

Recent in Nordic blog

Programming the nRF51822 Beacon Kit with the nRF51DK

Stefan Birnir Sverrisson

One way to program the nRF51822 Bluetooth Smart Beacon Kit is to use the nRF51 DK. This gives you a full scale development platform (the nRF51 DK). This blog will go thru the steps needed to program…
- 7 May 2015
Bluz, a cloud connected Bluetooth LE development kit based on the nRF51822, is live on Kickstarter

eric ely

Bluz is a brand new development kit that brings Bluetooth LE to the internet. We have paired up with Spark and ported their FW to the nrf51822, allowing Bluz to be controlled and programmed over the…
- 15 Apr 2015
nRF51 current consumption for common scenarios

Stefan Birnir Sverrisson

The following is the estimated nRF51 current consumption during advertising with the DCDC disabled. Advertising 1: TX power: +4dBm adv interval: 20ms (minimum advertising interval in normal adversising…
- 14 Apr 2015
Building kernel for RPi2 with bluetooth_6lowpan for Raspbian

Håkon Alseth

Building kernel for RPi2 with bluetooth_6lowpan In this guide, you will have two choices: Cross-compilation build Native build Choose the one that fits your needs. Cross-compilation is…
- 9 Apr 2015
Debugging with Real Time Terminal

FormerMember

In SDK 12.0.0 or later, logging/debugging over RTT is built in to the logger module NRF_LOG. To enable logging over RTT, "check" the NRF_LOG_BACKEND_SERIAL_USES_RTT option in sdk_config.h in the configuration…
- 8 Apr 2015
Accessing the BLE mesh via the particle.io (spark.io) cloud

David Edwin

Hello. I was spending the last few days to implement an interface to access the BLE mesh via the Internet. The mesh consists of devices with LEDs, which then could be turned on and off in my browser.…
- 1 Apr 2015