Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
Clarification needed - MCUboot + Watchdog (SDK v2.9.0) 0

Dear nordic team, even if enabled for mcuboot via CONFIG_WATCHDOG / CONFIG_BOOT_WATCHDOG_FEED, our device performs a reset when swapping the image. More precisely: when...
22 views

0 replies

Started 7 hours ago
by uknoblic
Not Answered
Matching circuit for nRF54L15+ nRF21540 GPIO 0

Hi I remember the Devzonw could ask for hardware instructions. My matching circuir has used the nRF54L15 reference design and nRF21540 DK design, all the value is the same...
35 views

0 replies

Started 9 hours ago
by Ziyao Zhou
Not Answered
nrf cloud provisioning "CONFIG_NRF_PROVISIONING_CBOR_RECORDS is too small" 0

Hi, I'm testing the nrf_provisioning sample application. I have built it with the coap overlay. After claiming the device in the nrf cloud and assigning the " nrf-cloud...
30 views

0 replies

Started 10 hours ago
by P_J
Not Answered
USB CDC EPOUT not working (Errata [199] USBD) 0

Hi, USB CDC EPOUT stops working as the USB incoming traffic data rate increases. The symptoms of this issue align with the Errata 199. The workaround for Errata 199 is...
- easydma
- Failure Analysis
- nrf5 sdk
- nrf52840
- usb
- production
26 views

0 replies

Started 10 hours ago
by chaitz
Not Answered
Please note that the very first fix after device start-up is a rather different measurement than any of the following consecutive fixes. 0

Hello, We’re testing the nRF9160 GNSS performance on our custom PCB and have noticed that, even with A-GPS, the first fix after powering on the device takes significantly...
48 views

0 replies

Started 3 days ago
by Roman Veselskyi

Recent in Nordic blog

Power Optimization — From 3 to 7 Months on a Single Charge

Yaniv Nis

A case study on optimizing battery power consumption for CC2538 but can also apply for nRF52 based device - https://medium.com/jumperiot/power-optimization-from-3-to-7-months-on-a-single-charge-56de0c30f062…
- 10 Jul 2017
Bluey Beacon - Building a Nordic nRF52832 BLE IoT Sensor Beacon

Mahesh Venkitachalam

In this project, we’re going to build a BLE Beacon that transmits temperature, humidity and ambient light levels to a dashboard on the internet. Bluetooth Low Energy is a technology that was designed…
- 9 Jul 2017
Nordic Thingy:52 node.js/Raspberry Pi demos

esivertsen

Our brilliant apps engineers continue to play around with our newly-launched Nordic Thingy:52. This time, Joakim has prepared a few Javascript demos using node.js and a Raspberry Pi. The Thingy connects…
- 5 Jul 2017

Latest guides

Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021
Peripherals And RF Test: Adding a Peripheral(SPI) to an NCS (version 1.x) Zephyr project

Jeff4BLE

Objectives Provide a brief primer to NCS and Zephyr Provide a quick-start guide to adding peripherals to an existing sample project Demonstrate running both foreground and background tasks within Zephyr…
- 21 Feb 2021