Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
Implementing discovery service. Getting undefined error with bt_dis_pnp_params. }; 0

Hi, I am implementing discovery service but getting undefined error with below bt_dis_pnp_params pnp_id = { .vendor_id_source = BT_DIS_VENDOR_ID_SRC_USB, .vendor_id...
14 views

0 replies

Started 12 hours ago
by subhash neogi
Not Answered
BLE Mesh Deep Sleep and RTC Setup 0

Hi, I am using Mesh of 30 nodes with avg Current Consumption 6mA and 2mA in sleep mode(by calling k_sleeps) , timer is 1s timer is running to keep Real Time incremented...
34 views

0 replies

Started 16 hours ago
by AP
Not Answered
SDK2.9.0 - QSPI and TWI driver power management (CONFIG_PM_DEVICE_RUNTIME) 0

Hi. After migration from SDK2.7.0 to SDK2.9.0 I have issues with power mangement. CONFIG_PM_DEVICE_RUNTIME=y, which I used, causes that twi driver doesn't start. I try to...
54 views

0 replies

Started 3 days ago
by PW
Not Answered
I am developing with the nRF54L15 DK, but the code do not run stable, what can it be? 0

The nRF54L series is a new device to the nRF family, and during the bring-up of the chip from early engineering samples to mass production devices there have been quite a...
151 views

0 replies

Started 20 days ago
by Kenneth
Not Answered
BLE audio from nrf5340 to Samsung Galaxy Buds3 0

Hello. I am trying to implement stable connection between my nordic nrf5340 and Samsung Galaxy Buds3 earbuds. I did it based on ble audio example with two connections (one...
89 views

0 replies

Started 1 month ago
by mib383

Recent in Nordic blog

Keil in-line program through DFU BLE

scytulip

I am investigating Master Emulator API and found something interesting that can help you program your device through BLE DFU in Keil. This method calls the python script used in MCP. If you can use MCP…
- 29 Oct 2014
Nordic Semiconductor nRF51822 Firmware for Background Data Recording

scytulip

#Nordic Semiconductor nRF51822 Firmware for Background Data Recording Updating on https://github.com/scytulip/nrf51-back-rec Design Objective This firmware is designed for low-cost long-time low-power…
- 23 Oct 2014
Nordic nRF51822 ARM Cortex-M0 Development using emIDE

Hugh

Nordic nRF51822 ARM Cortex-M0 Development using emIDE To avoid the hefty charges with commercial compilers I tried emIDE with some success; here are the settings I used for the EV Kit Official emIDE…
- 22 Oct 2014

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021