Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
peer disconnect is not recognized when (connected peers < max peer number) in multiperipheral mode 0

Hi, I am using multiperipheral mode in ble_app_hrs using the ble_app_multiperipheral example taking the functions on_connected and on_disconnected while connect and disconnect...
- nrf52832
709 views

0 replies

Started over 6 years ago
by kvskt
Not Answered

nRF52810 bootloader no timeout when OTA fails 0

Hi, I'm using nRF52810 on SDKv14.2 and I have changed the bootloader from 52832 to work for 52810. I could do OTA now. I found that the bootloader there is no timeout when...

956 views

0 replies

Started over 6 years ago
by Alice
Not Answered
Why UART packet is terminated due to NULL character? 0

Is there a way around the issue where bluetooth communication acting as a pass-though terminates the packet whenever null character is found in the packet. SDK: nRF5_SDK_12...
- 10040 nrf52832 s132
676 views

0 replies

Started over 6 years ago
by Harshil
Not Answered

Difference between attr_char_value.init_len and attr_char_value.max_len 0

Hi, When creating and adding an characteristic to service, what the meaning and difference between these two variables: attr_char_value.init_len attr_char_value.max_len...

725 views

0 replies

Started over 6 years ago
by MichaelNordicUser
Not Answered
Bluetooth Privileged permission error Keyboard HID with nRF52832 0

Hi all, I have compiled the ble_app_hids_keyboard example for a nRF52832 on a Laird DVK-BL652 breakout board. I have a tablet running android 5.1.1 and the nordic nRFConnect...
- hid nrf52832 android
2160 views

0 replies

Started over 6 years ago
by chris

Recent in Nordic blog

Driving WS2812B LEDs using I2S on the Nordic nRF52832

Mahesh Venkitachalam

In this article, I use the I2S peripheral of the Nordic nRF52832 to generate the waveforms required to drive the popular WS2812B RGB LEDs. http://electronut.in/nrf52-i2s-ws2812/
- 18 Aug 2017
Walkthrough of Nordic Thingy:52 Node.js Raspberry Pi demos

gamnes

Thingy:52 Node.js Raspberry Pi Interface This blog post is a follow up to the Nordic Thingy:52 node.js/Raspberry Pi demos blog post, and will described how you can run and what to expect from each of…
- 17 Aug 2017
ble_app_hrs_freertos running in Atollic TrueSTUDIO

jmag999

This post describes how you can get the ble_app_hrs_freertos example project running in Atollic TrueSTUDIO 8.0 on a pca10040 board. This is a managed make build, it does not rely on the makefile provided…
- 14 Aug 2017

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021