#
# Copyright (c) 2023 Nordic Semiconductor
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

source "Kconfig.zephyr"

menu "Nordic Scan sample"

config WIFI_MAC_ADDRESS
	string "WiFi MAC address"
	default "F6:CE:36:00:00:01"
	help
		Wi-Fi MAC address to be used by the sample. If not set, the sample will
		use the default MAC address (locally administrative). This is only used
		when the nRF7002 OTP is not programmed with a MAC address.

config WIFI_SCAN_INTERVAL_S
	int "Scan interval (seconds)"
	default 10
	help
	  Specifies the scan interval in seconds.

config WIFI_SCAN_BANDS_LIST
	string "Frequency bands to scan"
	default "2" if WIFI_SCAN_PROFILE_2_4GHz_ACTIVE || WIFI_SCAN_PROFILE_2_4GHz_PASSIVE || WIFI_SCAN_PROFILE_2_4GHz_NON_OVERLAP_CHAN
	default "5" if WIFI_SCAN_PROFILE_5GHz_ACTIVE || WIFI_SCAN_PROFILE_5GHz_PASSIVE || WIFI_SCAN_PROFILE_5GHz_NON_DFS_CHAN
	default "2,5" if WIFI_SCAN_PROFILE_2_4GHz_NON_OVERLAP_AND_5GHz_NON_DFS_CHAN
	default ""
	help
	  Specifies the frequency bands to scan, as follows:
	  2 - 2.4 GHz,
	  5 - 5 GHz,
	  6 - 6 GHz,
	  "" - All bands allowed by the regulatory domain.
	  Multiple bands can be specified as comma separated band values.
	  Only regulatory domain permitted values are allowed.

config WIFI_SCAN_CHAN_LIST
	string "Channel list for scan"
	default "2:1,6,11" if WIFI_SCAN_PROFILE_2_4GHz_NON_OVERLAP_CHAN
	default "5:36,40,44,48,149,153,157,161,165" if WIFI_SCAN_PROFILE_5GHz_NON_DFS_CHAN
	default "2:1,6,11_5:36,40,44,48,149,153,157,161,165" if WIFI_SCAN_PROFILE_2_4GHz_NON_OVERLAP_AND_5GHz_NON_DFS_CHAN
	default ""
	help
	  Specifies the list of channels used to perform scan.

config WIFI_SCAN_DWELL_TIME_ACTIVE
	int "Active scan dwell time"
	default 50
	range 5 1000
	help
	  Active scan dwell time (in ms) per channel.

config WIFI_SCAN_DWELL_TIME_PASSIVE
	int "Passive scan dwell time"
	default 130
	range 10 1000
	help
	  Passive scan dwell time (in ms) per channel.

choice
	prompt "Choose a WiFi Scan Profile"

config WIFI_SCAN_PROFILE_DEFAULT
	bool "Scan in all bands and channels"
	help
	  Enable this profile to do Wi-Fi scan in all supported bands and channels.

config WIFI_SCAN_PROFILE_ACTIVE
	bool "Active scan"
	help
	  Enable this profile to do active scan where allowed.

config WIFI_SCAN_PROFILE_PASSIVE
	bool "Passive scan"
	help
	  Enable this profile to do passive scan on all channels.

config WIFI_SCAN_PROFILE_2_4GHz_ACTIVE
	bool "Scan in the 2.4 GHz band using active scan"
	help
	  Enable this profile to scan in the 2.4 GHz band using active scanning where allowed.

config WIFI_SCAN_PROFILE_2_4GHz_PASSIVE
	bool "Scan in the 2.4 GHz band using passive scan"
	help
	  Enable this profile to scan in the 2.4 GHz band using passive scanning on all channels.

config WIFI_SCAN_PROFILE_5GHz_ACTIVE
	bool "Scan in the 5 GHz band using active scan"
	help
	  Enable this profile to scan in the 5 GHz band using active scanning where allowed.

config WIFI_SCAN_PROFILE_5GHz_PASSIVE
	bool "Scan in the 5 GHz band using passive scan"
	help
	  Enable this profile to scan in the 5 GHz band using passive scanning on all channels.

config WIFI_SCAN_PROFILE_2_4GHz_NON_OVERLAP_CHAN
	bool "Scan only non-overlapping channels"
	help
	  Enable this profile to scan only non-overlapping channels (1, 6, 11)
	  in the 2.4 GHz band.

config WIFI_SCAN_PROFILE_5GHz_NON_DFS_CHAN
	bool "Scan only non-DFS channels"
	help
	  Enable this profile to scan only non-DFS channels (36, 40, 44,
	  48, 149, 153, 157, 161, 165) in the 5 GHz band.

config WIFI_SCAN_PROFILE_2_4GHz_NON_OVERLAP_AND_5GHz_NON_DFS_CHAN
	bool "Scan only non-overlapping and non-DFS channels"
	help
	  Enable this profile to scan only non-overlapping channels
	  (1, 6, 11) in the 2.4 GHz band and non-DFS channels (36, 40, 44,
	  48, 149, 153, 157, 161, 165) in the 5 GHz band.

endchoice

endmenu