OTBR on Raspberry

[vorrias]

Hi people,

I am trying to build the OTBR on Raspberry 4. A lot of discussions done here  to see if it is running on Raspberry 4 or not. I do not have a Raspberry 3.

I am confused after reading for 2 days trying to solve this out. Some posts are  old and I do not know if there is latest info on this

Here what I have done and found a brick wall so far

1 - I tried with  Raspberry 64 bit OS Bookworm.  No way installation frozen

3 - I tried 32 bit OS Bullseye .  OTBR installed with no errors but when trying to build the  RCP firmware onto an nRF52840 Dongle I ended up with errors:

<Compiling the C compiler identification source file "CMakeCCompilerId.c" failed.
Compiler: arm-none-eabi-gcc
Build flags:
Id flags:  

The output was:
No such file or directory>

Is anyone did it on Raspberry 4 and how?

Can I do it other way and forget Raspberry Pi at all?

Load Ubuntu on Raspberry ? What version?

Forget Raspberry and run it on a known Ubuntu version in a PC?

And final question.

Do I need at all the OTBR (I know its role) to start developing Matter applications?

I have to move fast on a custom project that uses matter on the nRF5340 chip.
I have also nRF7002 DK, Thingy:91, nRF52840 dongle and Thingy:53 is on the road

Anybody can help to unstuck me?

Thank you

Vasilis

[vorrias]

Hi Raoul,

I understand binary for ARM is out of the question now.
That brings me in the first scenario. That is to use nrfutil 6.

So I did:

$ Install nRF Util: $ python3 -m pip install -U nrfutil

That is producing the errors:

ERROR: Could not find a version that satisfies the requirement pc_ble_driver_py>=0.16.4 (from nrfutil) (from versions: 0.1.0, 0.2.0, 0.3.0, 0.4.0, 0.5.0, 0.6.0, 0.6.1, 0.6.2, 0.8.0, 0.8.1, 0.9.0, 0.9.1, 0.10.0, 0.11.0, 0.11.1, 0.11.2, 0.11.3, 0.11.4)

ERROR: No matching distribution found for pc_ble_driver_py>=0.16.4 (from nrfutil)

Is the correct way I am installing it or is it wrong?

If that can be corrected somehow that will solve the problem or I will forget it l

Regards

Vasilis

[Raoul]

Hi again,

Sorry, I didn't really use my brain earlier. Are you following this guide? https://developer.nordicsemi.com/nRF_Connect_SDK/doc/2.5.0/nrf/protocols/thread/tools.html#thread-border-router

Because the only reason to have nrfutil is to flash the 52 dongle/DK to use as a coprocessor. You could do this on any machine really, through our Programmer app or nrfutil, or nrfjprog.exe.

So it's not really a dependency for setting up OTBR. If you're having trouble, I would recommend you just use your other development PC to create the coprocessor.

Good luck!

Best regards,

Raoul

[vorrias]

Oh yes my friend Raoul.

I do not need the Raspberry to program the dongle/DK

I didn't use my brain also but following the instantiation instructions you noted to program it in the OTBR.

So do not bother any more. I will do it with nrfutil binary into my UBUNTU LTS running on my laptop.

OTBR solved on Raspberry 4. That is loading UBUNTU 20 LTS and Then Install OTBR.

One last Thing I will do is to program another SD using UBUNTU LTS 22 64 Bit on Raspberry 4.

It is better if it will. Then I will put results here for other people to know.

Regards

Vasilis

[Raoul]

Fantastic, glad to hear!

Best regards,

Raoul

[vorrias]

OK

OTBR is running on Raspberry 4 (4GB RAM)  + UBUNTU LTS 22 64 Bit . OK

OpenThread Radio Co-processor on nRF52840 Dongle is configured  using PC with UBUNTU 20 LTS. OK

Concern this thread as answered

Now I have bigger problems on setting up the Matter and Thread network. The documentation is confusing.

But that will be another thread.

Thank you Raoul

Vasilis