• State Verified Answer
  • Replies 7 replies
  • Subscribers 73 subscribers
  • Views 11842 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 120042
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Is MTU of all BLE devices limitted to 23 bytes when using ATT protocol?

JoonDong

Is MTU of all BLE devices limitted to 23 bytes when using ATT protocol?

I don't know explicitly.

Some say it is possible to use MTU longer than 23 bytes.

Others say it is possible to use MTU longer than 23 bytes in softdevice(except to s132)

Is it impossible to use MTU longer than 23 bytes at Only softdevice?

does other vender implement MTU longer than 23 bytes for ATT protocol?

Parents
  • 0

    Hi JoonDong,

    Trying to answer the questions one by one:

    • "Is MTU of all BLE devices limited to 23 bytes when using ATT protocol?" - NO, 23 bytes is just default ATT_MTU size, can be negotiated higher.
    • "Is it impossible to use MTU longer than 23 bytes at Only softdevice?" - Soft Device S130 (for nRF51) and S132 (for nRF52832) support extended ATT_MTU since v2.x, S140 and others as well.
    • "does other vender implement MTU longer than 23 bytes for ATT protocol?" - Yes. Also note that you don't need to use Nordic BLE stack (Soft Device) on nRF5x, there are alternatives in open source projects such as Zephyr or Mynewt.

    Cheers Jan

  • 0 in reply to endnode

    So is it possible to fail communication if MTU is different from the value I expected? I tested with ble_uart example.

    When I set the MTU to 23, the server can send a packet with a GATT MTU longer than 20 using the double sending method.

    But when I modified MTU=16, pca10028 could not receive and recognize the packet with that server(iPhone) sent GATT_MTU longer than 13bytes. And I used nRF Toolbox app.

    Is this problem of server(iPhone) because iPhone expect 23 byte MTU but MTU was configured 16?

Reply
  • 0 in reply to endnode

    So is it possible to fail communication if MTU is different from the value I expected? I tested with ble_uart example.

    When I set the MTU to 23, the server can send a packet with a GATT MTU longer than 20 using the double sending method.

    But when I modified MTU=16, pca10028 could not receive and recognize the packet with that server(iPhone) sent GATT_MTU longer than 13bytes. And I used nRF Toolbox app.

    Is this problem of server(iPhone) because iPhone expect 23 byte MTU but MTU was configured 16?

Children
No Data
Related
Terms of service