Hi All,
I am an electronics engineer but new to nRF51822 programming. I have used the PCA10000 & PCA10001 using Nordic SDK, using nRF Studio etc. In nRF Studio, you can program the S110 protocol independently from your own application. I am now trying to program a couple of other modules from a 3rd party, these are: T1RU.hXeXiXXXXXXXX_!!0-item_pic.jpg_460x460.jpg And some PTR5518. I came across this posting here: link text.
The posting is useful however, I am a little confused; I understand that I need to use the SWDIO & SWDCLK pins which I am aware of. I am also using an STM32F0discovery board for programming them which I read was able to program these modules: link text albeit for Linux.
My confusion is; what software do I use to do the programming? In the past with Nordic dev boards I used the nRF Studio which would allow me to program S110 and my own app independently. This board has SWDIO & SWDCLK but obviously wont be compatible with nRF Studio which means I cant program S110 and app separately. If I cant do that, how do you program the S110 into the right memory area (as nRF Studio does)?
I am sorry, I hope I have explained it properly. Initially to program the third party units, I connected a board to the SWDIO & SWDCLK of the PCA board and switched off the slide switch next to the Reset button but and tapped the power jumper/headers next to the Reset button, however, something still seems to be missing as it doesnt seem to program it correctly; if I program S110 first and then app, error is returned "CPU not in reset", if I do app first and then S110, no errors but it doesn not seem to be programmed as it doesnt work.
Is there a particular sequence for the SWDIO and Reset & programming procedure?
Any one can help?
Thanks very much. Sean
