Cannot get NB-IoT connection with nRF9160 DK

[SergioT]

From what I could see the Asset_Tracker example works in LTE, not in NB-IoT. How can I test NB-IoT?

I would like to get some hint on what example to use and what to do to get nRF Cloud connection through NB-IoT so that I can start my development from a working platform.

I have nRF9160 DK board, iBasics SIM card and also a 1nce SIM card. I am based in Munich and must develop a project based on the nRF9160 chip.

All tips are welcome.

[MJD093]

You will have errno.h. It's located in zephyr/lib/libc/minimal/include/errno.h.

Do try Martin's information on PCO_MODE.

[SergioT]

Regarding prj.conf, I can write whatever I like in the file, it doesn't cause an error or any change in the project. Therefore I am forced to conclude that it is not used, so all you r suggestions have zero effect... How can I make it work?

[Martin Lesund]

Hi Sergio,
You have to configure the prj.conf file located in the Application folder you are working with.

Please read through the tutorial on how to work with NCS for more details with regards to this.

---

Let us do some testing without modifying any applications to see if you actually can get an NB-iot connection:

1. Build and flash the default AT_Client sample

2. Open LTE LInk Monitor

3. Make sure the modem is off. (AT+CFUN=4)

4. Use the command:  AT%XSYSTEMMODE=0,1,0,0

5. Use the command AT%XEPCO=0

6. Then turn on the modem AT+CFUN=1

Then use the AT+CFUN? while the "Automatic requests" is turned on:

So you can see all the responses from the modem with the command AT+CFUN?

• Please share the LTE Link Monitor Log.

Best Regards,
Martin L.

[SergioT]

Thanks Martin: I included #define CONFIG_LTE_LEGACY_PCO_MODE on the top of lte_lc.c and now the Asset_Tracker does connect but not with the iBasics SIM card but with a 1nce SIM card.

I tried what you stated above and AT-CLIENT doesn't connect with iBasics SIM card either, although it works with the other.

So I'll go back to the version that is working and run from there. Thanks for you help. I'll study the tutorial you just sent me.

[SergioT]

I still can't get a connection with iBasis SIM card. Should I send AT+CGDCONT=1,"IP","<name>"? if yes, what should be instead of <name>?

Or another question: can I connect to nRFCLoud with a different SIM card?