I received THINGY:91 from NordicSemi. I use 10pins cable to connect to nRF9160 DK to program for THINGY:91.
and, I am using ncs_v1.0.0
I am trying to run asset_tracker application,
and I am confusing about:
1. which board should I select? I tried to use ncs_v1.0.0/zephyr/boards/arm/nrf9160_pca10090
but after programming, the LED on THINGY:91 changed to RED color, and I couldnt connect it from nrfcloud
I couldn't find pca20035 on ncs_v1.0.0. Do I need to use another version of ncs ?
2. How can I debug the output from THINGY:91
The terminal still shows the output from nRF9160 DK, nothing from THINGY:91
I have not got a Thingy:91 nor read up on the specifics of the device. I would suggest flashing the gps sample application to the device and seeing how the device responds to that program. That would give you an idea on if it is capable of GPS communication. I imagine that the device does have an on-board GPS antenna.
Thanks so much MJD093
It's encouraging at least that you have been able to successfully connect to nrf cloud. There are many reasons why the GPS data has not been acquired, such as interferance, poor satellite to UE visibility, tracking multiple satellites but they are not providing a fix, etc.
The GPS application will give you more information on the status of your UE to satellite link.
The pull request I referred to with the asset tracker example should work fine with nRF Cloud. I have tested it myself & it seemed to work perfectly. I will take a look at this case tomorrow morning when I have access to my Thingy:91 again.
Hoang If you want to see logging on the Thingy:91, it should suffice to open up the link monitor app, connect the Thingy:91 via USB, turn on the Thingy & then click off the Auto device/port filter button in the lower right hand corner of the Link Monitor app. Then, you should be able to choose between two different serial ports. Try both & one should give you UART logging of the Thingy:91. I am testing this now & will update the thread with a response soon.