Integration of Bond Management Service in GATT Server Profile

[Jaydev Borkar]

Hi ,
I would want to establish a GATT Server application as well as integrate Bond Management Service from glucose example (ble_app_gls) in examples folder of SDK15.3.0_59ac345 into my GATT Server Application. How to integrate this service into GATT Server application. What are the dependencies which I need to take care of while integrating this service.

[Jaydev Borkar]

  

I have attached the services I need including the standard services . I just have to integrate BMS into my GATT Server Profile. 

[Einar Thorsrud]

I see. So you need device information service and bond management service, as well as a custom service. Then I suggest you take the Bond Management Application example as a starting point since that already has both BMS and DIS and add your custom service there.

[Jaydev Borkar]

Thanks a lot .  Can you help me with adding custom service ? I tried using the following github code .

https://github.com/bjornspockeli/custom_ble_service_example 

I am getting following error with respect to SDK15.3.0. Error Attached herewith

I am getting errors using SDK15.0.0 too ..

Can you help me out with this ?

[Einar Thorsrud]

Hi,

The first error is because of nrf_power_clock.c no longer exist in SDK 15.3, and the example was made for an earlier SDK version. It has been split in two files, nrfx_clock.c and nrfx_power.c. But you can still refer to the example since you should anyway modify the BMS example and not the other way around (that has most of what you need), so there is no reason to use the segger project form the custom service example.

Regarding the second error in SDK 15.0.0 I don't immediately understand why you get that. GPIO_COUNT is defined in nrf52832_peripherals.h, which is included in nrf_peripherals.h as long as NRF52832_XXAA or NRF52832_XXAB is defined in the project, and it is for the example project. This, in turn, is included in nrfx_common.h, which is included in the nrfx files that need it.

[Jaydev Borkar]

Einar Thorsrud said:

The first error is because of nrf_power_clock.c no longer exist in SDK 15.3, and the example was made for an earlier SDK version. It has been split in two files, nrfx_clock.c and nrfx_power.c. But you can still refer to the example since you should anyway modify the BMS example and not the other way around (that has most of what you need), so there is no reason to use the segger project form the custom service example.

Thank you ! When I try to get connected to BMS service, the device gets connected for only few seconds. Then it asks for Bonding request as a pairing pop up, if I click on PAIR & CONNECT , it says pairing rejected by NORDIC_BMS . Then the connection gets disconnected . I actually dont need BONDING setup . NOT BONDED is the one which I am looking out for . Please advise .