Empty Scan Response Handling

Question

Hello All, 
 I have a basic question about empty scan response operation with the ADV_IND PDU. When I set advertising data as follows: 
 err_code = ble_advdata_set(&advdata, NULL);
 
 is the central somehow informed that there is no scan response data so that it has the option of not issuing a scan request, or does the central have to determine this by issuing a scan request and seeing that the scan response data length is 0? 
 Looking at the standard I did not see a defined way to specify an empty scan response in the 16-bit advertising channel PDU header, but this seems quite possible (unused RxAdd bit for example) and I wanted to make sure I haven't missed something. 
 Thanks and Regards,
Matt

David Edwin · Accepted Answer

There is no method by which the scanner can determine that the SCAN_RESPONSE is not present in an ADV_IND (advertising packet), so a scan request will be sent and a blank scan response is sent back to the scanner. 
 Do you wish to save power ?
I would suggest that you reduce the size of the ADV_IND packet and place the bulk of your advertising in the SCAN_RESPONSE.
Since the number of ADV_IND packet will outnumber the SCAN RESPONSE packets by a very large margin you will save power by making the ADV_IND as small as possible.

Empty Scan Response Handling

Top Replies