How to Implement Cable Replacement Service?

Question

Hi Team, 
 Can anyone help regarding Cable Replacement service.
Is this service is already supported in softdevices?
What are the options if not supported?

Stian Røed Hafskjold · Accepted Answer

Cable Replacement profile is a Bluegiga proprietary profile and is not a profile standardized by the
Bluetooth SIG. 
 We have an example project (w/ app on phone-side) in our SDK, called "ble_app_uart": developer.nordicsemi.com/.../a00072.html 
 Please see this tutorial on how to use the example: devzone.nordicsemi.com/.../ 
 EDIT 
 To show you how to change the UUIDs I have started out with the ble_app_uart example. In that example you have the ble_nus.c and ble_nus.h files which describes the UART service. 
 First go to section 2.2.4 in the nAN-36 app note i linked to in the comment to see how UUIDs work. 
 So, in the cable replacement service you have two base UUIDs. In the ble_crs.c the NUS_BASE_UUID is defined, which is the service UUID. You need to change this to the one you want to use. We also want to add a new base UUID for the TX characteristic. The values below are the ones described in the Cable Replacement service description. 
 #define NUS_BASE_UUID {{0xcc, 0x77, 0xba, 0xf1, 0x42, 0x27, 0x4d, 0x8e, 0x9b, 0x46, 0xcb, 0xe7, 0x66, 0x16, 0xd5, 0x0b}} /**< Used vendor specific UUID. */
#define NUS_TX_BASE_UUID {{0xc1, 0x3c, 0x35, 0x55, 0x28, 0x11, 0xe1, 0xaa, 0x76, 0x48, 0x42, 0xb0, 0x80, 0xd7, 0xad, 0xe7}} /**< Used vendor specific UUID. */
 
 In ble_nus.h the 16 bit service UUID is defined, which is the 3rd and 4th byte in the base UUID. Change this to the one you want to use. In your case that would be the 0x1666 value in the base UUID 
 #define BLE_UUID_NUS_SERVICE 0x1666 
 
 The 16 bit UUID for the tx characteristic is defined in ble_nus.c , and you want to change this to this: 
 #define BLE_UUID_NUS_TX_CHARACTERISTIC 0xd780
 
 Now we would like the tx characteristic to use the NUS_TX_BASE_UUID we defined, not the NUS_BASE_UUID which is used by default. So, we need to add a the new base UUID in the tx characteristic. Go to nAN-36 section 4.4.3 to see how to add a new base UUID. In tx_char_add() in ble_nus.c add this to the code: 
 uint32_t err_code;
ble_uuid128_t nus_tx_base_uuid = NUS_TX_BASE_UUID; 
err_code = sd_ble_uuid_vs_add(&nus_tx_base_uuid, &p_nus->uuid_type);
if (err_code != NRF_SUCCESS){return err_code;}
 
 You can add this at the top of the function. 
 You can also remove the rx characteristic, since you don't need it. Go to the ble_nus_init() function in ble_nus.c and remove the block: 
 // Add the RX Characteristic.
err_code = rx_char_add(p_nus, p_nus_init);
if (err_code != NRF_SUCCESS)
{
 return err_code;
}

How to Implement Cable Replacement Service?

Top Replies

core_v2_widget.Hide()