NFC Tag nRF52840 max voltage and current ratings

[Konstantin Y]

Dear Support team,

 I am using the NFC Tag of the nRF52840, CKAA F.

 What is the maximum rating of voltage and current of the NFC Tag?

-> I set NFCPINS.PROTECT = NFC which is supposed to short circuit at approximately 2 V.

Best regards,
Konstantin

[Simonr]

Hi Konstantin

The maximum input current on the NFCT pins is 80mA according to the NFCT Electrical specification. As for the voltage, the peak differential field detect threshold on NFC1-NFC2 is 1.2 Vp, while the maximum voltage on the pins themselves would be VDD. Setting NFCPINS.PROTECT = NFC will indeed protect the SoC from high voltage fields by shorting the pins when it exceeds 2V.

Best regards,

Simon

[Konstantin Y]

Thank you for the reply! Are the NFCT pins shorted with each other or are they both shorted to GND? (asking proactively for a risk discussion)

[Simonr]

The NFC protection circuit will short the two pins together if voltage difference exceeds approximately 2V.

Best regards,

Simon

[Vivia]

What does the circuit look like internally in the chip, which shorten the two pins together?

Will the pins heat up? Does the NFC-Antenna heat up? 

Does this princible work also for strong magnetic fields? Is there a limit to it? 

I need to be sure, that the chip will not be destroyed by strong voltages accross the NFC-Antenna. 

Best regards, 

Vivia

[Simonr]

Hi

It's important that the Absolute maximum ratings found in the product specification are not exceeded at any point, so I'm not sure what you mean about "strong voltages", but the NFC pins should not be exposed to more than 3.9V. You should also be in line with the NFCT electrical specifications (also in the PS). The pins or antenna should not "heat up" noticeably if kept in line with the specs, nor should it be destroyed depending on what voltages you refer to as "strong".

Best regards,

Simon