I am porting my code from Nordic SDK16 to Zephyr and NRF Connect SDK 2.0. I am working on putting a chip into sleep mode and set up a wake up on a press of the button. Everything seems to be working ok on the first run but after the chip wakes up, the gpio call back gets called twice and I have no idea why. I tried removing a call back with gpio_remove_callback(button.port, &button_cb_data) but its not helping. Thanks for any help.#define SW0_NODE DT_ALIAS(sw0)
#if !DT_NODE_HAS_STATUS(SW0_NODE, okay)
#error "Unsupported board: sw0 devicetree alias is not defined"
#endif
static const struct gpio_dt_spec button = GPIO_DT_SPEC_GET_OR(SW0_NODE, gpios, {0});
static struct gpio_callback button_cb_data;
static int disable_ds_1(const struct device *dev)
{
ARG_UNUSED(dev);
pm_policy_state_lock_get(PM_STATE_SOFT_OFF);
return 0;
}
SYS_INIT(disable_ds_1, PRE_KERNEL_2, 0);
static void power_down() {
printk("Power down\r\n");
pm_state_force(0u, &(struct pm_state_info){PM_STATE_SOFT_OFF, 0, 0});
k_sleep(K_SECONDS(2U));
}
static void prepare_wake_up() {
printk("Preparing wake up\r\n");
nrf_gpio_cfg_input(NRF_DT_GPIOS_TO_PSEL(DT_ALIAS(sw0), gpios), NRF_GPIO_PIN_PULLUP);
nrf_gpio_cfg_sense_set(NRF_DT_GPIOS_TO_PSEL(DT_ALIAS(sw0), gpios), NRF_GPIO_PIN_SENSE_LOW);
}
static void button_pressed(const struct device *dev, struct gpio_callback *cb, uint32_t pins)
{
if (gpio_pin_get(button.port, button.pin)) {
printk("Button pressed...\r\n");
} else {
printk("Button released...\r\n");
prepare_wake_up();
power_down();
}
}
int main() {
if (!device_is_ready(button.port)) {
printk("Error: button device %s is not ready\n",
button.port->name);
return;
}
gpio_pin_configure_dt(&button, GPIO_INPUT));
gpio_pin_interrupt_configure_dt(&button, GPIO_INT_EDGE_BOTH);
gpio_init_callback(&button_cb_data, button_pressed, BIT(button.pin));
gpio_add_callback(button.port, &button_cb_data);
}
On the first run it will be:
Button pressed...
Button released...
Prepare wake up...
Power down...
Then after system wakes up with the press of the button, this happens:
Button pressed...
Button pressed...
Button released...
Prepare wake up...
Power down...
Button released...
Prepare wake up...
Power down...
