In order to reduce power consumption , I configured the RX pin of the serial port with an interrupt , and when the device was asleep , it was woken up by an interrupt , and...
Hi I am using an nRF54L15 with an external watch crystal. I have notice that depending on the manufacturer of the crystal I have to use a different internal load capacitor...
i've noticed that the pc-nrfconnect-ppk is written in typescript (with a lot of .tsx files for visual elements)....
my understanding is that at the lowest-level the power...
I am using the `mcumgr` subsys to enable the DFU (Device Firmware Update) capabilities in a custom device that also features a custom (non mcuboot) bootloader. In order to...
Hi !
I have a peripheral that can connect to other nRF52's or a smart phone such as iPhone or android. Is there an easy way to detect a smart phone?
The best I can think...
Hello Nordic Team,
I have a working project that uses BLE to communicate with a mobile app, and I am now looking to integrate Google Fast Pair as an additional feature....
Hi,
I recently found out about the Periodic interval feature on GRTC CC[0] and it seems like it would be quite useful for my application. Most of my code so far uses the...
Hello,
I'm writing a driver for an I2C device (it's an external led driver).
My current code executes following steps ...
First I changed I2C configuration :
static...
Hello there.
I'm porting some code that previously worked on S110 stack v7 to stack v8 and I'am experiencing some issues.
After receiving a BLE_EVT_USER_MEM_REQUEST...
Accoding to the "how to generate the INIT file for the DFU",I have configuration Boot loader.hex,but i don't known how to configuration Soft Device.hex.The following is the...
Hello Nordic~
I want to control button debouncing on my nrf51822 based custom board. I went through the button_debounce example found in [Board/nrf6310/debounce_example...
Hi All,
I'm using ble_app_uart Application to send some notifications from Peripheral to central device. I'm using API ble_send_string() to send notifications to other...
I have an iOS app which is a central to a peripheral running on an nRF51822. A similar Android app works fine and is able to connect to the peripheral, discover services,...
I couldn't find anything with the search here or google so I felt free to ask.. maybe someone already updated to Windows 10 and can tell if everything works well?
Hi ,
I am trying to advertise HID Keyboard Example forever untill the device is powered off
Please let me know how to do this and also how to power optimise.
Kind...
Can I calculated elapsed time from one event using TIMER1?
If yes,how?I can not find none register which one to read for get counter value(how many ticks have passed since...
Hello, I follow
this page to start the rpi2 for 6lowpan.
when I tried to run RADVD Daemon as follow:
Set IPv6 forwarding (must be present).
sudo echo 1 > /proc...
Hello!
I recently purchased a RedBearLab nRF51822 board where I want to use several DS1820 temperature sensors.
For dealing with the OneWire (1-wire) protocol I found...
Hello,
I'm not sure if this was already asked before. I didn’t found a similar question, so here it is: When I have a function that manipulates a data structure to communicate...
