Hi.
I wonder if you could help me:
I'm using a thingy91x and would like to work with the npm1300. In the case of this hardware, the PMIC npm1300's i2c bus is connected...
RTT log output issue
Hello, I am using SDK v3.0.2 and toolchain v3.0.2. After building and flashing my firmware, no logs are being output to RTT Viewer. What should I do...
We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
Hi all!
I have the NRF54H20 D and somehow the RTT viewer doesn’t work, the board doesn’t work. I am using the most simple zephyr hello world project. It says it is compatible...
Hi there,
We are using for BLE communication a nRF52832 chip with random static address configuration (shown in the UART). Can we be sure that the address of a chip will...
I am building an application for the nRF52840 on Linux just using west . I have been struggling with this issue for some time now. The linker can't find any mbedtls_ccm functions...
Hello, I am experiencing issues with the current measurements taken by the PPK2 when using the nPM2100-EK to power a device. The current drawn from the 2.7V power source ...
Hello,
I am using ses and nrf52840 dk
I wrote the code for reading temperature from the inbuilt temperature sensor and when I read value from TEMP register I am getting...
I am trying to perform a large SPI transfer of 72576- 104976 bytes to an nRF52840 SPI slave. I'm running into an error thrown by the SDK indicating that this length is invalid...
hello,When the device's pairing record is lost, the phone's is in.stack report PM_CONN_SEC_ERROR_PIN_OR_KEY_MISSING What should I do? NEF52832,SDK15.2.0,S132
I am trying to use the Zigbee SDK to develop a device to connect to older legacy ZigBee HA coordinators. To do this, I need to use the zb_ha_ez_mode functions detailed in...
Hi, we are evaluating possibly using OTS in our product. We are currently on SDK 15.3.0 and when I look at the documentation:
https://infocenter.nordicsemi.com/topic/com...
Hello,
I really need your help with my problem.
I have a sparkfun nrf52840 mini which is the peripheral, using the code ble_app_uart, and a smartphone with a custom...
I'm compiliing against version 1.1.0 of the ncs, and my device have the mfw 1.1.0 firmware running.
When starting the device, I get the following output:
This is not...
Hello,
I am using nRF52840, SDK_16.0.0, S140 SoftDevice and Segger 4.16 for flashing the image. I am using ‘ble_app_blinky’.
I am new to DFU feature on Nordic. I have...
I have custom board with nrf 52832. I am using SDK 15.2.0. and soft devices s132 V6.1.0 to transmit advertising packets with advertising interval 1s. I have written simple...
Hello :)
After upgrading the modem firmware of the nRF9160 to version 1.1.0 (mfw_nrf9160_1.1.0.zip) the call to getaddrinfo returns error 12.
If I downgrade to version...
Hello, everyone~
A new requirement is generated from my customer. He wants the ANCS can transmit more than 20m in a house. So I want to know if BLE 5.0 long range can transmit...
Hello!
I am dealing with nrf52832. I want to process data reception with SPI during f_write processing. Is this possible? As multi-thread processing 1) PT_THREAD in pt...
I'm developing a wearable device using nRF52832. I am developing OTA-DFU nowadays. I have successfully tested the buttonless OTA-DFU using the nRF52-DK.
And I'm testing...
Hi, I have a nRF9160 and I am currently working with the gps example: ncs\nrf\samples\nrf9160\gps
When I run the example, I only see
all the time. I went out on a big...
Hello,
i am struggling with the implementation of i2s to use it one SK6812 Leds.
To start with i used this https://github.com/cheehieu/nrf52-sk6812-led-driver example...
