I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
im using sdk10 softdevice 8.0.
on my app I configured #define APP_ADV_INTERVAL 1500 and I noticed that when I activate Dfu service (activate notification on last service...
hello,
I am trying to direct advertisement on NRF51822 board.When giving the peer address i am confused that how to specify the address type of the device, whether BLE_GAP_ADDR_TYPE_PUBLIC...
Hello,
I made 10 custom board with nRF52 rev C, epson 128FA 128 32 MHZ, epson FC 135 32,768 KHz
I have some difficulties to get crystals working.
10 of the CPU run...
Hello!
I've developed a board with NRF8001 module mounted on it. Antenna on the board is much longer than in reference designs, so I can change the length. I also can add...
We been developing device based on NRF 51822 (NRF51822-CFAC-R) (62-UFBGA, WLCSP).
We plan to use 2032 battery, and need at least one year of autonomous BLE work, our device...
Hi,
As discussed here a way to advertise each 20msec is changing the mode to BLE_GAP_ADV_TYPE_ADV_IND. This is a connectable mode and assume we do not want a connection...
why I debug the project ble_app_hrs_rscs_relay in SDKv10\ble_central_and_peripheral\ , it can not go to main(), always stay on first,I do not change anything, it compile oK...
Hello,
When I restart my application with debugger, i have strange IRQs called (TWI, ...) before init. Possibly IRQ still active and debug don't touch them.
Can I disable...
Can you please provide an example on how to read 10kB from the internal flash using pstorage_load and send it to mobile phone (NRF Toolbox) via NUS UART BLE ble_nus_string_send...
Hi
I've just seen Nordic has ported FreeRTOS into the NRF5x series. Have you been using it together the S110? What's your experience? Could I use it together any SoftDevice...
hi, with good advisers in here, i can build the ble_uart_example and download it.
and using the function 'ble_nus_send_string' in 'ble_nus.c', i can send some messages...
I use the application timer with a schedular on the nRF52 with SoftDevice S132 1.0.0.3 alpha and SDK v0.9.2.
The application timer is running in repeated mode and should...
Hi guys,
As there are several minor and major versions of MBR in the wild I guess there could be useful function to get current MBR version during runtime. I haven't found...
Hello,
can I change the message that appears in the notification bar of the beacon server lib for Android 5.x? I know how to do that. I would like to know if it is allowed...
