Using one ADC, the current can be reduced to about 40uA after the ADC value is taken. Using a two-channel ADC, after the ADC value is taken, the current stops at about 0.4...
I'm searching for a software engineer who can help us getting OTA support between nRF52810 and PIC16 MCU.
nRF52810 must have command- and data mode over UART, Pic controler...
I want to be able to read the gyro and accelerometer values from the MPU6050 sensor.
As a base start I downloaded the NRF5 SDK V15.3.0 and modified twi_sensor_pca10056 program...
Hi. I'm using nRF52832, SDK13.0.0.
I should use SHA256 and MD5.
I made my code as below.
NRF_CRYPTO_HASH_CREATE(init_packet_hash, SHA256); NRF_CRYPTO_HASH_CREATE(init_packet_md5...
Hi. I'm using nRF52832, SDK13.0.0.
I want to use SHA256 as below.
output32Byte = SHA256[input32Byte];
Which function or example can I refer to?
And also I want to...
I tried to port the example "ble_app_ipsp_initiator" to pc-ble-driver and run on Linux. The peer device is another PCA10056 device running ble_app_ipsp_acceptor. The problem...
hi...
i want to use two uarts in nRF52840 , one uart to one pc and another uart to another pc .Data should be transferred and received between the nRF52840 and pc how can...
I am creating software for a proof-of-concept device using the nRF52840 Dev Kit and nRF Connect for VS Code.
I started a few weeks ago with the Nordic UART Service code...
With Zephyr, I am using BLE Stack sample (rpc-host) on net core and peripheral_uart on app core. I changed the uart pins on from the standard dvk configuration on devicetree...
Hi
I was wondering why there there seems to be no information about profiling of the LC3 codec by T2.
Only information I found is from Karl's answer here :
The rule...
Hi~ I have a new NRF52832 REV3 xxAA board, and I need to read its SRAM value. However, when I use the JLink command to read it, I get 0. I have tried recover and eraseall...
I have the occasional issue where connecting VDD to VTG either on P20 or shorting SB24 will cause the nRF9160 DK to brown out. This happens when an external device to be programmed...
Good day everyone
I'm attempting to build a temperature sensor on i2c am running into this error. Currently using a custom board. I see that the issue was previously mentioned...
Hello,
I was working on DFU where i am stuck in a problem when i update the code via Seggar UI--> Build--> build and run, here everything works fine that is i can see the...
Hi,
When using USB to upgrade, it is necessary to use NRFUtil tool to transfer the upgrade package, may I ask what download protocol it includes? Our requirement is to make...
Setup, Windows 10 PC, nRF Connect for Desktop 3.12.0, BLE App v4.0.0 The windows nRF Connect for Desktop BLE Application on Windows 10 no longer works properly. I've managed...
Hello,
I would be interested in knowing if there is a plan to develop Linux kernel drivers for the nRF7002.
If yes, when would that be and would there be any requirements...
I'm trying to do something extremely simple but can't get it to work. Through the dev academy, I successfully loaded up and executed exercise 1. However, when I then try to...
Hi everybody, Question: Is there a way to set the external library from within the my_project.code-wokspace with vscode? Similar to what is possible with the workspace feature...
Hi,
I'm testing the Matter cluster Scenes in order to develop a device that implements it correctly.
I have this setup:
- One nrf52840dk flashed with the light_bulb...
I'm using the following:
nRF Connect for Desktop v.3.12.0, nRF Connect for Desktop Programmer v. 3.0.4, jLinkARM.dll version: 7.64e, Ubuntu 22.04.1 LTS
I'm trying to program...
