I'm in the early stages of building a Thread + CoAP low-power sensor and using the nRF54L15-Tag as a starting point. Using NCS, the lowest idle current I can get is 13 microamps...
We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
I am not sure, but i think we found bug or some interesting feature in sending notification values.
Here is the code i used:
uint32_t ble_meas_on_ext_adc_change(ble_meas_t...
Hi,
I know s110 doesn't support HFP and HSP.
So I want to know if there has a another way that nordic51822 can receive mobile phone sound and translate sound to mobile phone...
Hi
Maybe this is a silly question, but I'm getting into desperation!!!
The problem is that playing with the LBS example ( github.com/.../nrf51-ble-app-lbs) , I've noticed...
I'm interested in creating a time of flight algorithm and am trying to calculate what to expect for accuracy.
Is it possible to get an IRQ from when the sync arrives at...
Hi,
I am interfacing a TI TM4C123 microcontroller to the AddiCore nRF24L01+ Transceiver Module. I can consistently transmit and receive data with the microcontroller/nRF24L01...
Hi,
We are using nRF51822 in our custom board.
nRF51822 is interfaced with a MCU using UART.
We want to load firmware image in MCU which will then flash nRF51822...
Hi,
I have a nRF51822 Development Kit and a nRF51822 Bluetooth Smart Beacon Kit. I want to run on the nRF51822 Smart Beacon Kit the nRF-Sniffer (v1.0.1) application. The...
how i used central send data to peripheral.
one broad use S120and other broad use S110.Now i see explame is nrf51822\Board\nrf6310\s120\experimental\ble_app_hrs_c..have another...
In ble events handler after connecting to peripheral device i handle BLE_GAP_EVT_CONNECTED event and try to identity connected device:
case BLE_GAP_EVT_CONNECTED:
{
...
Use "nrfjprog.exe --eraseall --programs s110_nrf51822_7.0.0_softdevice.hex --program app.hex bootloader.hex --verify --reset" to flash my device, return a error "write_and_verify_hex_file...
Moving from SDK version 5.1 to 6.0, the buttons on my PCA20006 beacons no longer works as expected. When I press a button, it seems to register the release of a button incorrectly...
As I've seen many others have done, I bought the nRF518822 Development Kit not seeing that I needed the $400 nRFgo motherboard.
Searching around reveals that shouldn't...
I am trying to get the Arduino DUE up and running with the Redbear v2 BLE shield, and SDK 0.9.3.
It was a pretty trivial operation with Arduino YUN, but I not so much for...
