nRF Connect SDK Tutorial series - Part 0

Here are the links to the old NCS Tutorials that are specific to nRF9160:


This tutorial series will cover the basics of building an application using the nRF Connect SDK with the boards listed down below. It consists of three parts; the first part will quickly get you up and running, while part 2 and 3 will go more into details about the most important aspects of NCS development.

The tutorial supports these boards:

 → nRF9160 DK

 → nRF5340 PDK

The tutorials are written in a generic way and will not go too much into specific details about the listed boards (except for in part 1→Board Specific). The tutorials might emphasize more on the nRF9160, which is used to concretize the generic explanations in order to make it easier to understand. In some places, it is not possible to use generic instructions that apply to all the boards and concrete instructions for a specific board is included. To prevent confusion, concrete instructions are formatted in the following manner:

Text formatted in this manner contains instructions for a particular board(s), where the generic instructions are not suficcient. The information given in these boxes should not be ignored. 

You should also be aware of the bullet points throughout the tutorial series:

  • Text that is put in a bullet point like this is used for instructions (or table of contents). You have to do what this text tells you to.

All the parts of this tutorial series are tested with the board listed above, and you have to pick one board from the list. In order to follow the tutorials, you should find your board in the table below and set <board> accordingly. When you’ve chosen the board, pick one of the options for <board_variant> belonging to the same row. E.g. if you choose nrf9160_pca10090 as the board, you have to set <board_variant> to either nrf9160_pca10090 or nrf9160_pca10090ns. Whenever <board> or <board_variant> appears in this tutorial, you should use your selected options instead. You may get confused when other boards are mentioned in this tutorial series, but this is only for educational purposes, and you should always stick with your initial choice.

Board <board> <board_variant>
nRF5340_PDK nrf5340_dk_nrf5340 nrf5340_dk_nrf5340_cpuapp, nrf5340_dk_nrf5340_cpuappns
nRF9160 DK nrf9160_pca10090 nrf9160_pca10090, nrf9160_pca10090ns

 

  • Before starting on this tutorial series you should follow the Getting Started Assistant (GSA) in nRF Connect for Desktop. Check out Installing the nRF Connect SDK with the Getting Started Assistant for guidance on how to install and follow the GSA. In step number 3 of the GSA, you will be given the option to check out a specific tag through git checkout <ncs_tag>, then you should set <ncs_tag> to  “v1.2.0”.
  • Lastly, before starting the development, make sure you have installed the nRF Command Line tools. This includes the nrfjprog executable, which is required to program the Nordic chips.

Contents

If you have any questions regarding this tutorial, please create a ticket in DevZone.

Anonymous
Parents Comment Children
No Data