• State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 61 subscribers
  • Views 1382 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 101091
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ANT Broadcast example wont work, NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN

Nestor Matas

Hi

I'm just starting with all this. My set up is a nRFgo motherboard with a nRF51422 DK attached (PCA10007). I've installed all the tools of the toolchain as stated in the getting started guide, I'm using Keil uvision 5.0.5.15. I've compiled and run the basic blinky_example project and it worked ok, so the device is working properly and the toolchain seems to be well configured. But as soon as I move forward and try to load and run any of the examples that make use of the SoftDevice (S210_nRF51422_2.0.0.0) I fail.

With the ant_broadcast_tx example the program gets a 0x00001000 error code when calling sd_softdevice_enable(NRF_CLOCK_LFCLKSRC_XTAL_50_PPM, softdevice_assert_callback); That error is NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN, but I don't find any information on what to do to fix it. I've read that there may be problems accesing the softdevice if improper timer IRQs are set, but I'm just trying with the examples, I haven't touched a line of code.

Can someone light my path a little bit?

Thanks a lot.

Related