Can i set macaddress in bootloader and advertising it?

[wuvo.leo]

bootloader.rar(/attachment/d5fd4fbbc7d37433740f6c9468f3110b) bootloader_dfu.rar Hi,all.i want to set same macaddress with my app in bootloader,and advertise it in bootloader,that my phone can know the device is the updating device.Can do it as this?Thanks a lot!

[Hung Bui]

@wuvo.leo: You can simply remove the part that we change the address in the bootloader at dfu_transport_update_start() , where we call sd_ble_gap_address_set().

You can have a look here at question I, for the explanation why we do that.

dfu_transport_ble.c

[wuvo.leo]

Thanks, Hung Bui! i want advertising Mac address in manufdata in "advertising_init" function.but if i do this,device name change from Dfutarg to no name.what's wrong?

[Hung Bui]

@wuvo.leo: Could be smth wrong with the advertising packet setup. Make sure you don't use too long name and manufacturing data. Maximum advertising packet size is 31 bytes. If you need more you can use scan response packet. If you still have trouble, please upload your project here.

[wuvo.leo]

Hi,Hung Bui.Thanks for your reply first. i still have trouble.i paste my function here:

---

static void advertising_init(uint8_t adv_flags)
{
    uint32_t      err_code;
    ble_advdata_t advdata;
    ble_uuid_t    service_uuid;
	  ble_advdata_manuf_data_t manufdata;
	  int32_t       uniqueid[2] = {NRF_FICR->DEVICEADDR1, NRF_FICR->DEVICEADDR0};
    uint8_t addrarray[8] = { 0 };

    service_uuid.type = m_dfu.uuid_type;
    service_uuid.uuid = BLE_DFU_SERVICE_UUID;
		
	  memset(&manufdata, 0, sizeof(manufdata));
    manufdata.company_identifier = 0xFF90;
    manufdata.data.size = 6;
	
	  memcpy( (void *)&addrarray,(void *)&uniqueid,sizeof(addrarray) );
	  addrarray[1] |= 0xc0;
	  memcpy( (void *)&addrarray[2],(void *)&addrarray[4],4);
	  manufdata.data.p_data = ((unsigned char*)addrarray);
    memset(&advdata, 0, sizeof(advdata));

    advdata.name_type                     = BLE_ADVDATA_FULL_NAME;
    advdata.include_appearance            = false;
    advdata.flags                         = adv_flags;
    advdata.uuids_more_available.uuid_cnt = 1;
    advdata.uuids_more_available.p_uuids  = &service_uuid;
		advdata.p_manuf_specific_data   = &manufdata;

    err_code = ble_advdata_set(&advdata, NULL);
    APP_ERROR_CHECK(err_code);
}

---

i used nRF Master Control pannel to find my device,and display my device name "n/a",no connect button.Please help me.Thank you!

[Hung Bui]

@wuvo.leo: How does you set the device name ? It should be set in gap_params_init().

Regarding "no connect button", you need to check the advertising type if it's connectable.