Data Structures

Here are the data structures with brief descriptions:

CAccAxesRaw_t	Acceleration data struct
Cbatt_meas_init_t	Init parameters for m_batt_meas
Cbatt_meas_param_t	Input parameters for m_batt_meas
Cble_tcs_init_t	Thingy Configuration Service initialization structure
Cble_tcs_s	Thingy Configuration Service structure
Cble_tes_init_t	Thingy Environment Service initialization structure
Cble_tes_s	Thingy Environment Service structure
Cble_tms_init_t	Motion Service initialization structure
Cble_tms_s	Motion Service structure
Cble_tss_init_t	Thingy Sound Service initialization structure
Cble_tss_s	Thingy Sound Service structure
Cble_uis_init_t	LED Button Service init structure. This structure contains all options and data needed for initialization of the service
Cble_uis_s	LED Button Service structure. This structure contains various status information for the service
Cdrv_acc_cfg_t	LIS3DH accelerometer configuration struct
Cdrv_bh1745_cfg_t	BH1745 configuration
Cdrv_bh1745_data_t	Measurement result
Cdrv_bh1745_threshold_t	Measurement thresholds
Cdrv_ccs811_alg_result_t	The algorithm result data of the CCS811 device
Cdrv_ccs811_cfg_t	CCS811 configuration
Cdrv_color_init_t	Color sensor configuration struct
Cdrv_ext_gpio_init_t	GPIO extender driver configuration
Cdrv_ext_light_conf_t	Struct that defines the type of light (monochrome or RGB) and the corresponding connected pins. All lights are per definition sinked (The IO extender provides ground to the lights)
Cdrv_ext_light_data_t	App timer and internal light timing struct
Cdrv_ext_light_init_t	Struct for initializing the light driver
Cdrv_ext_light_rgb_intensity_t	Simplified struct for setting RGB intensity directly
Cdrv_ext_light_rgb_sequence_t	The color mix and sequence variables if a sequence (e.g. breathe) is used
Cdrv_ext_light_status_t	Struct used by the app_timer handler, mainly for power saving
Cdrv_gas_init_t	Gas sensor init struct
Cdrv_hts221_calib_t	Calibration struct
Cdrv_hts221_cfg_t	Configuration struct for HTS221 humidity sensor
Cdrv_hts221_twi_cfg_t	Initialization struct for the humidity driver
Cdrv_humidity_init_t	Initialization struct for the humidity driver
Cdrv_lps22hb_cfg_t	Configuration struct for the LPS22HB pressure sensor
Cdrv_lps22hb_twi_cfg_t	Initialization struct for the LPS22HB pressure sensor driver
Cdrv_motion_cfg_t	Motion configuration struct
Cdrv_motion_twi_init_t	Motion initialization struct
Cdrv_mpu9250_init_t	TWI communication initialization struct
Cdrv_pressure_evt_t	Pressure event struct
Cdrv_pressure_init_t	Initialization struct for pressure driver
Cdrv_speaker_init_t	Speaker driver initialization type
Cdrv_sx1509_cfg_t	SX1509 configuration
Cm_audio_frame_t	Compressed audio frame representation
Cm_batt_meas_event_t	The struct passed to the handler with relevant battery information
Cm_ble_evt_t	BLE event structure
Cm_ble_init_t	Initialization parameters
Cm_ble_service_handle_t	BLE service handle structure
Cm_environment_init_t	Initialization parameters
Cm_motion_init_t	TWI configuration struct
Cm_ui_init_t	TWI configuraion
Cstate_of_charge_t	Struct for providing m_batt_meas with information on converting voltage to state of charge (Remaining battery capacity)
Csx150x_led_drv_regs_vals_t	Struct for holding values to be placed in io extender led driver registers. Consult the SX150x manual for further details
Cvoltage_divider_t	Struct for providing m_batt_meas with physical voltage divider information