Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
Periodic advertising data 0

Hi, I am trying to understand periodic advertising and some basic questions: I am using periodic_adv example from the NCS. I see teo ADV data defined in the file as...
9 views

0 replies

Started 1 hour ago
by DanisXZ
Not Answered
how to enable pm managment at nrf5340 0

software:ncs 2.5.0 hardware:nrf5340 dk hi professor, According to the article at https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/optimizing-power-on-nrf53...
13 views

0 replies

Started 2 hours ago
by sunnyyang
Not Answered
Why is UART Power Management Not Affecting Power Consumption on nRF9151DK? 0

您好，我目前正在使用 SDK 版本为 v2.7.0 的 nRF9151DK 开发板。我的目标是通过在不需要时以编程方式暂停 UART 来降低运行时的功耗。以下是我的代码： void button_pressed_cb(const struct device *dev, struct gpio_callback *cb, uint32_t pins...
17 views

0 replies

Started 6 hours ago
by GUOQI123
Not Answered
nrf52840DK board issues , devices are not connected when try to flash the code 0

Hi I have recently bought the product nrf52840 from Digi key, i have dumped the code so many times but now days it is showing the error. the issues is whenever iam trying...
20 views

0 replies

Started 9 hours ago
by Rachitareddy
Not Answered
Issue facing in connection between central device (1st "xiao nrf52840 sense") to peripheral device (2nd "xiao nrf52840 sense") 0

Hi everyone, I’m a complete beginner and need some help. I’m working with two XIAO nRF52840 Sense boards: one as a central and the other as a peripheral. My goal is to send...
- software
- Evaluation
- zephyr
- bluetooth le
- nrf52840
28 views

0 replies

Started 9 hours ago
by JAYnish2345

Recent in Nordic blog

Parse MQTT message in Wireshark for IoT test

Jun Qing ZOU

Wireshark (version 1.12.5 at the time of writting) lists MQTT as supported protocol but could not parse it from the TCP payload by default. We can add some plugins to enable it. Download the Wireshark…
- 26 May 2015
Upgrade RADVD for IoT on Raspberry Pi 2

Jun Qing ZOU

The RADVD deamon in Raspberry pool is version 1.8.5 (up to Raspberry 2015-02-16). root@raspberrypi:~/radvd# apt-cache policy radvd radvd: Installed: 1:1.8.5-1 Candidate: 1:1.8.5-1 Version table…
- 25 May 2015
Workaround needed for TWI driver (nrf_drv_twi) in SDK v8.1 (TWI_COUNT missing)

Hung Bui

In SDK v8.1 we added the TWI driver (nrf_drv_twi.c). Unfortunately the nrf_drv_config.h file wasn't updated correctly with the new driver. The symptom is the error with "TWI_COUNT is missing". Here…
- 20 May 2015

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021