Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered

DFU can not complete 0

Hi, Recently, the DFU of the "Master Control Panel" (Android) can not complete the upload mission. But, the DFU of the nRF-Toolbox in iOS is work well. Old...

592 views

0 replies

Started over 10 years ago
by Jason
Not Answered
iOS nRF Toolbox 1.5/1.6 doesn't send long init packet 0

I just tried out the new iOS nRF Toolbox 1.5 and it doesn't seem to handle long init packets. I gave it a zip file that contains a 137216 byte 'application.bin' and a 192...
870 views

0 replies

Started over 10 years ago
by Clem Taylor
Not Answered
Can BLE and SoC events cause SD_EVT_IRQn simultaneously? 0

Hello everybody, In the SD_EVT_IRQn ISR I check for BLE and SoC events and set flags for each so my application can fetch and dispatch the events in the main context. ...
- event
- irq
- s110
- ble event
- oftdevice
- soc event
- interrupt
- isr
- nrf51822
1268 views

0 replies

Started over 10 years ago
by Moloch
Not Answered
Assembly Code in SDK 7.2 DFU 0

Hi, in the example bootloader in sdk 7.2, there is an assembly code block in SVC_Handler, in dfu_ble_svc.c. I found that the offset in line: LDR R0, [R1, #24] always...
- bootloader dfu
1131 views

0 replies

Started over 10 years ago
by Ethan Winchell
Not Answered
[Bug Report] C header uses C++ keywords as variable names 0

In nRF51 SDK 7.1.0, there is a c header file using c++ keywords operator . Here is a snippet of components/ble/ble_racp/ble_racp.h using the keywords. /**@brief Record...
- nrf51 cpp
945 views

0 replies

Started over 10 years ago
by R. Kawajiri

Recent in Nordic blog

What impact does the deprecation and withdrawal of Bluetooth Core specification v4.0 and v4.1 have on your current and future products?

Petter Myhre

This blog was last updated 17.01.2019. The Bluetooth Special Interest Group (SIG) recently announced the deprecation and withdrawal of Bluetooth Core specifications v4.0 and v4.1. For products that are…
- 30 Oct 2018
The S132 v5.1.0 is now production tested on nRF52810

Petter Myhre

This blog describes how you can setup a Segger Embedded Studio example for PCA10040E (emulating nRF52810) from nRF5 SDK 14.2 to use S132 v5.1.0, instead of S112. The procedure should be similar for the…
- 12 Sep 2018
Adding custom commands to a BLE example using Nordic UART Service

Håvard

A common thing to do is to use the Nordic UART Service for quick prototyping. Often the example itself is used as a starting point (ble_app_uart). But sometimes we use other starting points, and want to…
- 6 Sep 2018

Latest guides

Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021
Peripherals And RF Test: Adding a Peripheral(SPI) to an NCS (version 1.x) Zephyr project

Jeff4BLE

Objectives Provide a brief primer to NCS and Zephyr Provide a quick-start guide to adding peripherals to an existing sample project Demonstrate running both foreground and background tasks within Zephyr…
- 21 Feb 2021