Hi All,
I'm using nRF24L01P for TX device and want to receive packet from nRF51822 RX device.
nRF24L01P TX device Register settings are as follows;
Reg.EN_AA=0x00...
I am trying to develop for some nRF51822 mbed boards, and I would like to use the S130 SD to enable both central and peripheral behaviour. The machine I'm using for development...
I'm using the nRF51822 eval kit
I have installed MCP but after starting I get pop-up: Master Control Panel has stopped working
In nRFgo Studio / Device manager pane...
the proximity example is running ok. but when I modify the length of the alert_level I have the following error on the server side that I am not understanding.
476;16:12...
Hi all,
I'm working with the nrf51422 and the nrf51822 and I was wondering what the current status of the over the air DFU system is.
I'm using SDK 6.0 and I managed...
Since Nordic Semiconductor released the S130 SoftDevice for our nRF51 ICs in early 2015, we have been working hard to make our Bluetooth low energy protocol stacks more feature rich and more configurable…
In this blogpost we will demonstrate the usage of Keils integrated command line functionality. We will start nrfjprog through Keil bindings in order to erase our chip and program SoftDevices.
nrfjprog…
Bluetooth LE is a fantastic technology for battery powered, Internet of Things devices. However, most dev kits require tethering to a smartphone, limiting the range and usefulness to only when the user…
Serial DFU Procedure and Tips
Hi,
Some of you may need to use Serial DFU to transfer firmware from external MCU or PC.
So I am posting this blog to might help saving your time to debug and development…
If you have bookmarked pages in our Infocenter, you might have noticed that many of those links don't work anymore. This is due to major changes to the backend of the Infocenter structure that will make…
Here is a demo of a small graphics engine I designed that allows me to embark moving pictures on a nRF52832 directly in code with a reasonable occupied memory size (i can do RLE or LZ4 compression).
The…