Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
Do you have plans to have larger flash on NRF51822 chip? 0

We want to move all our product logic to NRF51822 chip but 256 flash is not enough for that. 512 would be more than enough for that.
- nrf51822 flash 512
526 views

0 replies

Started over 11 years ago
by Maidu
Not Answered

PCA20006 nRF51822 Beacon Firmware 0

I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330. I understand need to modify GPIO. PCA20006 firmware consist of 3 firmware, SoftDevice, application...

1064 views

0 replies

Started over 11 years ago
by RatocKen
Not Answered

nRF MCP apk Current Time display error 0

nRF MCP apk, the month of Current Time display error, should "minus 1" according to the BT's "data_time" define.

577 views

0 replies

Started over 11 years ago
by Matt
Not Answered
Is it possible to set the value of the RTC COUNTER in the nRF51822? 0

I see that there is a task for clearing the RTC COUNTER register, but is there a way to initialize the RTC counter value to something other than 0?
- rtc
- keil
- nrf51822
1429 views

0 replies

Started over 11 years ago
by Matt
Not Answered

Battery measurement with ADC on nrf51422, S210 0

I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled. From the example nrf51-ble-app-temp-master, I found...

1382 views

0 replies

Started over 11 years ago
by AndrewM

Recent in Nordic blog

Nordic nRF51822 ARM Cortex-M0 Development using emIDE

Hugh

Nordic nRF51822 ARM Cortex-M0 Development using emIDE To avoid the hefty charges with commercial compilers I tried emIDE with some success; here are the settings I used for the EV Kit Official emIDE…
- 22 Oct 2014
Beacon Kit - Mistake in Ref_Design_UG_v1.0

Salman

I connected the programming header as described in "nRF6930_Beacon_Ref_Design_UG_v1.0.pdf" 5.5.4 Programming interface. I was trying to program Beacon Kit but failed many times then I compared it with…
- 10 Oct 2014
SD card interfacing

Salman

Hi, I have written SD & SDHC card routine for reading, writing and erasing data from SD card. It used the hardware SPI of nRF51822. NOTE: 1)Define the PINs of SD card first before initialing. 2)Define…
- 10 Oct 2014
How different BLE packet types influence throughput

Stefan Birnir Sverrisson

There are several types of write operations, write request with authorization, write request without authorization and write command. You can see message sequence charts for those messages here and he…
- 9 Oct 2014
Measuring Lithium battery voltage with nRF51

Stefan Birnir Sverrisson

Here is an example of a hardware setup to measure the voltage on a Lithium battery with a voltage divider and a connected capacitor. The Lithium battery typically has a voltage range of 2.7 - 4.2 V and…
- 2 Oct 2014
Sniffer application for OS X

RK

I've put up on Sourceforge, a Mac OSX application which interfaces with the Nordic BTLE sniffer software and has some of the functionality of the Windows application Nordic ships with that software package…
- 1 Oct 2014