Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
nrf9160 AWS Iot mqtt Disconnect Issue 0

Hello, We are having an issue on our nrf9160 custom board and application where we receive an AWS IoT mqtt Disconnect while waiting for an PUBACK from AWS!!! We are using...
51 views

0 replies

Started 2 days ago
by JLCIOT
Not Answered
Intermittent Stuck in "Connecting..." with iOS 18 and nRF Connect Mobile 0

Hello Nordic Community, I’m encountering an intermittent issue with my BLE peripherals, which are based on nRF5340 + nRF7002 SoC , while testing with nRF Connect Mobile...
29 views

0 replies

Started 2 days ago
by Lucas Heitele
Not Answered
Issues Enabling NRFX_DPPI on nRF54 0

Based on this example, I am working on porting a pulse counter to the nRF54 and have encountered issues enabling the DPPI peripheral. The problem is when enabling CONFIG_NRFX_DPPI...
24 views

0 replies

Started 2 days ago
by rolma
Not Answered
Migration Issues from Zephyr 2.6.1 to 2.9.0: Configuration Problems and Deprecation Warnings 0

I am migrating from the 2.6.1 development environment to 2.9.0 but am unable to compile due to some configuration issues. My prj.conf configuration file is as follows: ...
24 views

0 replies

Started 2 days ago
by Andrea Verdecchia
Not Answered
nRF54L15 CAAA WLCSP 300 μm pitch matching network components 0

Hi, We have a pretty small device to be designed and I was wondering if nRF54L15 CAAA WLCSP would have updated recommendations for matching network components available...
21 views

0 replies

Started 2 days ago
by PenttiVaan

Recent in Nordic blog

nRF52 Range Extension with RFaxis' RFX2411N

Floyd Ashbaugh

External Power Amplifiers and LNAs easily connected to the nRF52 series device for high power extended range operation. Data sheets, white papers, schematics and layout information available at link t…
- 26 Jan 2016
Developing Nordic nRF51 applications with mbed and Visual Studio

ivan

This tutorial shows how to use the mbed framework to develop applications for Nordic nRF51 devices. Before you begin, install VisualGDB 5.1 or later. Start Visual Studio and open the VisualGDB Embedded…
- 26 Jan 2016
PA / LNA support in S132

Einar Thorsrud

The S132 SoftDevice for the nRF52 has support for enable/disable switching of external Power Amplifiers (PA) and Low Noise Amplifiers (LNA) using GPIO pins. This was introduced in S132 version 2.0.0-7…
- 25 Jan 2016

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021