Hi Team,
NCS v2.3.0
nrf52840
my project works as expected with CONFIG_APP_MSC_STORAGE_RAM=y
but I need storage FLASH_FATFS
and the disk does not open in Windows, it gives an error window when connecting nrf USB.
Thank you.
4034.chatDK_update.7z
Hi Team,
NCS v2.3.0
nrf52840
my project works as expected with CONFIG_APP_MSC_STORAGE_RAM=y
but I need storage FLASH_FATFS
Hi,
Could you please show the error that you get?
Best regards,
Dejan
windows error looks the same as in devzone.nordicsemi.com/.../nrf52833dk_nrf52833-usb-mass-storage-issue
Hi,
Could you share your changed prj.conf file?
Best regards,
Dejan
# # Copyright (c) 2020 Nordic Semiconductor ASA # # SPDX-License-Identifier: LicenseRef-Nordic-5-Clause # CONFIG_NCS_SAMPLES_DEFAULTS=y # Deffered logging helps improve LPN power consumption # when friendship is established. CONFIG_LOG_MODE_DEFERRED=y # General configuration CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048 CONFIG_FLASH=y CONFIG_FLASH_MAP=y #CONFIG_NVS=y CONFIG_SETTINGS=y CONFIG_HWINFO=y CONFIG_DK_LIBRARY=y #CONFIG_PM_SINGLE_IMAGE=y #CONFIG_PM_PARTITION_SIZE_SETTINGS_STORAGE=0x8000 #CONFIG_SOC_FLASH_NRF_PARTIAL_ERASE=y # Bluetooth configuration CONFIG_BT=y CONFIG_BT_COMPANY_ID=0x0059 CONFIG_BT_DEVICE_NAME="Mesh Chat" CONFIG_BT_L2CAP_TX_MTU=69 CONFIG_BT_L2CAP_TX_BUF_COUNT=8 CONFIG_BT_OBSERVER=y CONFIG_BT_PERIPHERAL=y #CONFIG_BT_SETTINGS=y CONFIG_BT_RX_STACK_SIZE=2000 # Disable unused Bluetooth features CONFIG_BT_CTLR_DUP_FILTER_LEN=0 CONFIG_BT_CTLR_LE_ENC=n CONFIG_BT_DATA_LEN_UPDATE=n CONFIG_BT_PHY_UPDATE=n CONFIG_BT_CTLR_CHAN_SEL_2=n CONFIG_BT_CTLR_MIN_USED_CHAN=n CONFIG_BT_CTLR_PRIVACY=n # Bluetooth Mesh configuration CONFIG_BT_MESH=y CONFIG_BT_MESH_RELAY=y CONFIG_BT_MESH_FRIEND=y CONFIG_BT_MESH_ADV_BUF_COUNT=13 CONFIG_BT_MESH_RX_SEG_MAX=10 CONFIG_BT_MESH_TX_SEG_MAX=10 CONFIG_BT_MESH_PB_GATT=y CONFIG_BT_MESH_GATT_PROXY=y CONFIG_BT_MESH_DK_PROV=y # Enable Bluetooth mesh models debug logs CONFIG_BT_DEBUG_LOG=y CONFIG_BT_MESH_LOG_LEVEL_DBG=y # Enable Shell module and use UART as a backend CONFIG_SHELL=y CONFIG_SHELL_BACKEND_SERIAL=y CONFIG_USE_SEGGER_RTT=y CONFIG_STDOUT_CONSOLE=y #USB related configs CONFIG_USB_DEVICE_STACK=y CONFIG_USB_DEVICE_PRODUCT="Zephyr MSC sample" CONFIG_USB_DEVICE_PID=0x0008 CONFIG_LOG=y CONFIG_USB_DRIVER_LOG_LEVEL_ERR=y CONFIG_USB_MASS_STORAGE=y CONFIG_USB_DEVICE_LOG_LEVEL_ERR=y CONFIG_USB_MASS_STORAGE_LOG_LEVEL_ERR=y CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=n CONFIG_MAIN_STACK_SIZE=1536 CONFIG_APP_MSC_STORAGE_FLASH_FATFS=y #CONFIG_APP_MSC_STORAGE_RAM=y # FOTA FOTA FOTA CONFIG_IMG_MANAGER=y CONFIG_MCUBOOT_IMG_MANAGER=y # Enable point to point DFU over SMP CONFIG_BOOTLOADER_MCUBOOT=y CONFIG_MCUMGR=y CONFIG_MCUMGR_CMD_OS_MGMT=y CONFIG_MCUMGR_CMD_IMG_MGMT=y # Enable the Bluetooth (unauthenticated) and shell mcumgr transports. CONFIG_MCUMGR_SMP_BT=y CONFIG_MCUMGR_SMP_BT_AUTHEN=n CONFIG_BT_L2CAP_TX_MTU=252 #CONFIG_BT_L2CAP_RX_MTU=252 #CONFIG_BT_RX_BUF_LEN=260 CONFIG_BT_BUF_ACL_RX_SIZE=256 CONFIG_BT_DATA_LEN_UPDATE=y CONFIG_BT_AUTO_DATA_LEN_UPDATE=y # Some command handlers require a large stack. CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=4096 # Enable Extended Advertiser to advertise BT SMP service CONFIG_BT_EXT_ADV=y CONFIG_BT_EXT_ADV_MAX_ADV_SET=4 # One extra connection for mesh GATT/proxy and one for SMP BT. CONFIG_BT_MAX_CONN=3 # One extra identity for SMP service CONFIG_BT_ID_MAX=2 # end FOTA FOTA FOTA end # FOTA External flash CONFIG_PM_EXTERNAL_FLASH_MCUBOOT_SECONDARY=y CONFIG_NVS=n CONFIG_SETTINGS=n CONFIG_PM_SINGLE_IMAGE=n # CONFIG_PM_PARTITION_SIZE_SETTINGS_STORAGE=0x8000 CONFIG_SOC_FLASH_NRF_PARTIAL_ERASE=n CONFIG_BT_SETTINGS=n
Hi,
I have replicated your issue using NCS v2.3.0. There are currently 2 options how you can fix the build error.
First option:
//in prj.conf, comment out configuration option CONFIG_BOOTLOADER_MCUBOOT #CONFIG_BOOTLOADER_MCUBOOT=y
//in prj.conf, make a following change to CONFIG_NVS CONFIG_NVS=y
Hi,
#CONFIG_BOOTLOADER_MCUBOOT=y
mass storage works, but FOTA update stopped working.
When can we expect a complete solution to the problem?
Best regards,
Serhii
Hi,
Could you please describe how you perform FOTA and provide all steps to reproduce your issue?
Could you provide your new project if there are differences with previously uploaded one?
Could you also provide log which would show us the error that you get when performing FOTA?
Due to vacations and potential limited staff availability, I cannot provide the expectation for problem resolution. However, I will look into your problem together with our developers and I will keep you updated with relevant new information. I have already reached out to our developers internally.
Thank you for your patience and understanding.
Best regards,
Dejan
Hi,
Could you please describe how you perform FOTA and provide all steps to reproduce your issue?
Could you provide your new project if there are differences with previously uploaded one?
Could you also provide log which would show us the error that you get when performing FOTA?
Due to vacations and potential limited staff availability, I cannot provide the expectation for problem resolution. However, I will look into your problem together with our developers and I will keep you updated with relevant new information. I have already reached out to our developers internally.
Thank you for your patience and understanding.
Best regards,
Dejan
Hi,
There were no differences from the previous one, I added your recommendations, the mass storage worked, I don’t get rtt errors, the update most often does not start and freezes, or ends with the message connection time out.
Best regards,
Serhii
Hi,
dejans said:Could you please describe how you perform FOTA and provide all steps to reproduce your issue?
We might need all necessary steps for reproducing your problem.
Sergnrf said:the update most often does not start and freezes, or ends with the message connection time out.
What happens when update freezes? Does it make any progress and then freezes?
Could you please show message connection time out?
Best regards,
Dejan
chatDK040723.rar
can fill the slot1 once, but writes Confirmed: FALSE, Active: FALSE, Permanent:FALSE
still looks like CONFIG_PM_EXTERNAL_FLASH_MCUBOOT_SECONDARY=y it doesn't work
large files does not react at all does not update in any way.
I apologize for the delay due to work switched to 2.4.0 NCS we hope to replace the FOTA to Mesh DFU
Hi,
Due to vacation time and hence reduced staffing, we would need more time to look into your issue. This issue has been reported, but some delay in replying should be expected. I will get back to you when I get new information.
I am sorry for any inconvenience.
Thank you for your patience and understanding.
Best regards,
Dejan