Central configuration - Discovery fail at MAX_CONNECTION_INTERVAL 50ms, passes at max 20ms

[Ron]

Hi

I am using nRF51822 for central and peripheral, S132, Based SDK12

Attempting to configure the nRF51822 as a central, I am experiencing issues with Discovery process failure, my peripheral connection interval is defined between 20ms-75ms

I have noticed that this is dependent on MAX_CONNECTION_INTERVAL, when I set up interval connection between 10-20ms it works, but if, for example I set it up 10-50ms discovery fails, not all services are discovered upon connection, why is that? is there a way around it?

Thanks

[Kenneth]

Hello,

Do you by any chance have a sniffer log (e.g. using nrf sniffer for ble) that we can look at?

Is it possible that you have slave latency here? Typically I recommend to wait to enable slave latency until the central have performed all the tasks it wants to (e.g. database discovery).

Kenneth

[Ron]

Hi Kenneth,

Yes I can try to sniff our the connection process,

But in the meanwhile, what do you mean by enabling slave latency until after, how do I do it?

Also, is there a way to change the max interval connection after discovery (I mean initiation of updating of connection-parameters by the central side)?

Thanks!

[Kenneth]

Hi,

Please sniff the connection when working and failng, it will be easier to understand what is actually happening then. 

In short: Slave latency control how frequently the peripheral must listen at a given connection interval, it can skip slave latency periods.

In short: Yes.

Kenneth

[Ron]

Hi Kenneth

Here are the wireshark results, passing and failing

Discovery_23_05_06_FAIL_b000.pcapng

Discovery_23_05_06_PASS_b000.pcapng

If you think the solution is to update the latency, or max-interval, please refer me to an example on how-to?

Thank you for your help! 

Ron

[Kenneth]

The sniffer logs helped a bit. Looks like my first assumption is likely wrong.

Instead, can you look into what lfclk configuration you have provided in ble_stack_init()?

Typically you can find something like this in ble_stack_init():

nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;

// Initialize the SoftDevice handler module.
SOFTDEVICE_HANDLER_APPSH_INIT(&clock_lf_cfg, true);

I need to know wht you have set .xtal_accuracy to for the lf clock configuration, and in specific (at least for test) suggest to use NRF_CLOCK_LF_XTAL_ACCURACY_500_PPM. But I would like to know all the paramters you have used for source, rc_ctiv, rc_temp_ctiv and xtal_accuracy.

Kenneth