• State Not Answered
  • Replies 40 replies
  • Subscribers 69 subscribers
  • Views 3849 views
  • Users 0 members are here
Attachments (3) Download All
Nordic Case Info
  • Case ID: 311053
Options

nrf9160 - lwm2m_Client (queue mode)

Hkhan7861

Good day

I am currently trying to a create a lwm2m client to use with my custom board.  When I have queue mode enabled and the device is sleeping, i use the lwm2m_send function and get a very high power consumption.  I have found  that the program hangs before getting this on the logging:

[00:19:30.532,806] <inf> net_lwm2m_engine: Connected, sock id 0

I have also attributed this to:

zsock_connect(client_ctx->sock_fd, &client_ctx->remote_addr, addr_len) 
when the client attempts to re-establish a connection   (lwm2m_engine_connection_resume), this function takes a while to complete it causes the high power consumption.  For a better understanding, I will post the power consumption while using and not using queue mode:
I have noticed that in queue mode,  a registration update is triggered.  However, the high power consumption occurs during the above mentioned process.  Is there a way that I can avoid as queue mode is essential for my project as I would like to send requests from the server while the device is sleeping.
Thank you in advance
Kind regards,
Hassan
Parents
  • 0

    Hello Hassan,

    Due to the summer vacation period we are currently understaffed, so delayed replies must be expected. I am sorry about any inconvenience this might cause.

    Best regards,

    Michal

  • 0 in reply to Michal

    No worries!  Please let me know as soon as soon as i can be assisted !

  • 0 in reply to Michal

    Good day

    I will get those to you soon I can. I would just like to ask how to do modem tracing on RTT since moving to  cellular monitor?  I inly have access to RTT and am hoping if that is possible?

    Kind regards,

    Hassan

  • 0 in reply to Hkhan7861

    Yes, it is possible to collect the modem trace via RTT, as shown in the documentation.

    Best regards,

    Michal

  • 0 in reply to Michal

    Hi Michal

    I have a nrf9160DK and im using it as a JLink programmer.  I can use it for RTT logging fine but when I try to do the same thing to get a modem trace, I don't receive anything through the trace.

    My prj file looks like this:

    # General config
CONFIG_NEWLIB_LIBC=y
CONFIG_ASSERT=y
CONFIG_REBOOT=y

# Network
CONFIG_NETWORKING=y
CONFIG_NET_NATIVE=n
CONFIG_NET_IPV6=n
CONFIG_NET_IPV4=y
CONFIG_NET_SOCKETS=y
CONFIG_NET_SOCKETS_OFFLOAD=y

# NBIOT Usage
CONFIG_LTE_NETWORK_MODE_NBIOT=y
CONFIG_PDN=y
CONFIG_PDN_DEFAULTS_OVERRIDE=y
CONFIG_PDN_DEFAULT_APN="nbiot.vodacom.za"
CONFIG_LTE_NETWORK_MODE_NBIOT=y

# Sensors
CONFIG_I2C=y
CONFIG_SPI=y
CONFIG_SENSOR=y

# LwM2M and IPSO
CONFIG_LWM2M=y
CONFIG_LWM2M_COAP_BLOCK_SIZE=512
CONFIG_LWM2M_COAP_MAX_MSG_SIZE=1280
CONFIG_LWM2M_ENGINE_MAX_OBSERVER=20

CONFIG_LWM2M_ENGINE_MAX_MESSAGES=20
CONFIG_LWM2M_ENGINE_MAX_PENDING=20
CONFIG_LWM2M_ENGINE_MAX_REPLIES=20

CONFIG_LWM2M_DNS_SUPPORT=y
CONFIG_LWM2M_RW_JSON_SUPPORT=n
CONFIG_LWM2M_SERVER_DEFAULT_PMIN=1
CONFIG_LWM2M_SERVER_DEFAULT_PMAX=300
CONFIG_LWM2M_CLIENT_UTILS=y
CONFIG_LWM2M_CLIENT_UTILS_LOCATION_OBJ_SUPPORT=n
CONFIG_LWM2M_IPSO_SUPPORT=y

# DTLS settings
CONFIG_LWM2M_DTLS_SUPPORT=y

# nRF9160 helper libraries
CONFIG_MODEM_KEY_MGMT=y

# Default app to debug logging
CONFIG_LOG=y
CONFIG_APP_LOG_LEVEL_DBG=y

# Support HEX style PSK values (double the size + NULL char)
CONFIG_LWM2M_SECURITY_KEY_SIZE=33

# extend CoAP retry timing to 4 seconds for LTE/LTE-M
CONFIG_COAP_INIT_ACK_TIMEOUT_MS=4000

# Enable CoAP extended option length
CONFIG_COAP_EXTENDED_OPTIONS_LEN=y
CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE=40

# Enable settings storage
CONFIG_SETTINGS=y
CONFIG_FCB=y
CONFIG_SETTINGS_FCB=y
CONFIG_FLASH_MAP=y
CONFIG_STREAM_FLASH=y

# LTE link control
CONFIG_LTE_LINK_CONTROL=y
CONFIG_LTE_NETWORK_MODE_LTE_M_GPS=n

# Modem library
CONFIG_NRF_MODEM_LIB=y

# Modem info
CONFIG_MODEM_INFO=y
CONFIG_MODEM_INFO_ADD_DATE_TIME=n

# Enable shell
CONFIG_LWM2M_SHELL=y

# Heap and stacks
CONFIG_HEAP_MEM_POOL_SIZE=16384
CONFIG_MAIN_STACK_SIZE=4096
CONFIG_LWM2M_ENGINE_STACK_SIZE=3072
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=4096

# Allow FOTA downloads using download-client
CONFIG_DOWNLOAD_CLIENT=y
CONFIG_DOWNLOAD_CLIENT_STACK_SIZE=4096
CONFIG_DOWNLOAD_CLIENT_HTTP_FRAG_SIZE_1024=y
CONFIG_FOTA_DOWNLOAD=y

# Application version
CONFIG_MCUBOOT_IMAGE_VERSION="1.0.0"

# Set LwM2M Server IP address here
CONFIG_LWM2M_CLIENT_UTILS_SERVER="coaps://leshan.eclipseprojects.io:5684"

# Application Event Manager
CONFIG_APP_EVENT_MANAGER=y

# Date-Time library
CONFIG_DATE_TIME=y
CONFIG_DATE_TIME_UPDATE_INTERVAL_SECONDS=86400

# Enable LwM2M Queue Mode
CONFIG_LWM2M_QUEUE_MODE_ENABLED=y

# Enable TLS session caching to prevent doing a full TLS handshake for every send.
CONFIG_LWM2M_TLS_SESSION_CACHING=y

# Socket close is skipped at RX off idle state which optimize power consumption
# Socket close call will enable RCC connection for send Alert message to server
# Alert is now send right before opening a new connection.
CONFIG_LWM2M_RD_CLIENT_SUSPEND_SOCKET_AT_IDLE=y

# Sets the duration that the lwm2m engine will be polling for data after transmission before
# the socket is closed.
# Adjust so that we can detach from network in 30 seconds
CONFIG_LWM2M_QUEUE_MODE_UPTIME=30

# Set lifetime of 12 hours
CONFIG_LWM2M_ENGINE_DEFAULT_LIFETIME=43200

# Do registration update after 5400 seconds (90 minutes)
CONFIG_LWM2M_SECONDS_TO_UPDATE_EARLY=37800

# Configure PSM mode`
# Request periodic TAU of 3600 seconds (60 minutes)
CONFIG_LTE_PSM_REQ_RPTAU="00000110"

# Set Requested Active Time (RAT) to 30 seconds. Preferably a little bit longer than the
# configured LWM2M_QUEUE_MODE_UPTIME. Due to NAT/firewall UDP connections are usually
# closed within 30-60 seconds so there is in general no point in setting a longer
# Queue mode uptime / LTE PSM active time.
CONFIG_LTE_PSM_REQ_RAT="00001111"

# Request eDRX mode
CONFIG_LTE_EDRX_REQ=y

# Request eDRX cycle length of 10.24 seconds for LTE-M
CONFIG_LTE_EDRX_REQ_VALUE_LTE_M="0001"

# Request eDRX cycle length of 20.48 seconds for NB-IoT
CONFIG_LTE_EDRX_REQ_VALUE_NBIOT="0001"

# Request Paging time window of 1.28 seconds for LTE-M
CONFIG_LTE_PTW_VALUE_LTE_M="0000"

# Request Paging time window of 2.56 seconds for NB-IoT
CONFIG_LTE_PTW_VALUE_NBIOT="0000"

# Get notification before Tracking Area Update (TAU). Notification triggers registration
# update and TAU will be sent with the update which decreases power consumption.
CONFIG_LTE_LC_TAU_PRE_WARNING_NOTIFICATIONS=y




# Sensors
CONFIG_I2C=y
CONFIG_SPI=n
CONFIG_SENSOR=n

#Enable/Disable RTT or UART Logging
CONFIG_CONSOLE=y
CONFIG_LOG=y
CONFIG_APP_LOG_LEVEL_DBG=y

CONFIG_USE_SEGGER_RTT=y
CONFIG_RTT_CONSOLE=y
CONFIG_UART_CONSOLE=n


# Set LwM2M Server IP address here








# Configure lwm2m version
CONFIG_LWM2M_VERSION_1_1=y
CONFIG_LWM2M_SERVER_OBJECT_VERSION_1_1=y

CONFIG_JSON_LIBRARY=y
CONFIG_BASE64=y
CONFIG_LWM2M_RW_SENML_JSON_SUPPORT=y

# w1 sensor interface configuration
CONFIG_SENSOR=y
CONFIG_W1=y

# Enabling RTC
CONFIG_COUNTER=y
CONFIG_PCF85063A=y

# Battery measurement
CONFIG_ADC=y

# Power saving
CONFIG_PM_DEVICE=y

# Configure internal flash


CONFIG_FLASH=y
CONFIG_FLASH_PAGE_LAYOUT=y
CONFIG_MPU_ALLOW_FLASH_WRITE=y
CONFIG_SOC_FLASH_NRF_EMULATE_ONE_BYTE_WRITE_ACCESS=y



CONFIG_LTE_NETWORK_USE_FALLBACK=n
CONFIG_LTE_NETWORK_TIMEOUT=120



CONFIG_WATCHDOG=y

CONFIG_NRF_MODEM_LIB_TRACE=y

CONFIG_NRF_MODEM_LIB_TRACE_BACKEND_RTT=y

  • 0 in reply to Hkhan7861

    Hello,

    Sorry for the delays, I was on a sick leave last week unfortunately.

    What if you turn off the logging via RTT? I think it may be interfering with the modem trace.

    Best regards,

    Michal

Reply Children
Related