DFU on NRF52

[Andrea]

Hello,

Has someone been able to use DFU with nRF52 device?

I'm trying to add the DFU capability/service to the HRM example. I have added the BLE_DFU_APP_SUPPORT define, and included the following 3 files to the project:

bootloader_util.c dfu_app_handler.c ble_dfu.c

When I compile I get this error:

............\components\libraries\bootloader_dfu\dfu_app_handler.c(153): error: #136: struct "" has no field "BOOTLOADERADDR"

It seems that the BOOTLOADERADDR (UICR) is not defined in nrf52.h

Thanks!

[Einar Thorsrud]

Most of the DFU stuff should be functional for the nRF52 in SDK 0.9.2, but not all. The HRM example project does not include project files using DFU (though the code is there when you define BLE_DFU_APP_SUPPORT as you did). The reason for this is probably that there is some work left there, but unfortunately the documentation does not reflect this.

There will be a new SDK release that addresses this at some point, but for now you can try to work your way around it.

After you have added the missing files to the project and defined BLE_DFU_APP_SUPPORT, you have to modify line 146 and 153 in components\libraries\bootloader_dfu\dfu_app_handler.c.

In both those lines you should replace NRF_UICR->BOOTLOADERADDR with *(uint32_t *)(0x10001014).

I have not tested this, but it should work.

[Einar Thorsrud]

It's good to hear it's working. I would be grateful if you could accept the answer by clicking the check mark to the left of it.