nrf connect desktop app blank screen

[gorazd]

I have read the related issues, none of them provided a solution for me. There was one answer which suggested to downgraded libstdc++6 as a solution without giving any specific instructions on how to do that, what version etc.

So, the 'Bluetooth low energy app' is suddenly starting with blank screen after trying to flash the firmware at the start. Other apps work fine (e.g. power profiler).

I am on Ubuntu 22.04.2 LTS 64bit using nrfconnect-4.1.2-x86_64.AppImage, nrf-command-line-tools_10.23.0_amd64.deb

I would like to use the app to perform dfu upgrades. I also tried that with nrfutil (nrfutil 7.1.0 (c86ddc2 2022-11-29)):

nrfutil device program --firmware dfu_mtk_v0.11.3_7b555.zip --serial-number 1050312843

gorazd@gorazd-Victus-by-HP-Laptop-16-e0xxx:~/Programs/nrf-rust/firmware$ nrfutil device program --firmware dfu_mtk_v0.11.3_7b555.zip --serial-number 1050312843
[00:00:02] ------   0% [2/3 1050312843] Failed, [jlink] INTERNAL_ERROR
Error: One or more program tasks failed

Enter your choice: : 0
  [------------------------------------]    0%
Traceback (most recent call last):
  File "nordicsemi/__main__.py", line 1555, in <module>
  File "click/core.py", line 1137, in __call__
  File "click/core.py", line 1062, in main
  File "click/core.py", line 1668, in invoke
  File "click/core.py", line 1668, in invoke
  File "click/core.py", line 1404, in invoke
  File "click/core.py", line 763, in invoke
  File "nordicsemi/__main__.py", line 1215, in ble
  File "nordicsemi/dfu/dfu.py", line 115, in dfu_send_images
  File "nordicsemi/dfu/dfu.py", line 88, in _dfu_send_image
  File "nordicsemi/dfu/dfu_transport_ble.py", line 474, in open
  File "nordicsemi/dfu/dfu_transport_ble.py", line 103, in open
  File "pc_ble_driver_py/ble_driver.py", line 106, in wrapper
pc_ble_driver_py.exceptions.NordicSemiException: Failed to open. Error code: NRF_ERROR_TIMEOUT
[75261] Failed to execute script '__main__' due to unhandled exception!

[runsiv]

Hi, 

I have asked the developers regarding question 1

Regarding question 2. Do you have https://github.com/NordicSemiconductor/nrf-udev installed?

Regards

Runar

[gorazd]

hi,

number 2 i found the solution on forum (port flag should be explicitly given, snr is not enough):

nrfutil dfu ble -pkg dfu_edh_0.11.4_for_testing_purpose.zip -ic NRF52 -n DfuMTK -p /dev/ttyACM0 -f

Problem 1 still persists.

[runsiv]

Thanks for the update. 

Are you able to run BLE app with verbose logging on and share the log? You will find the option in the about tab in the BLE app

Regards

Runar

[gorazd]

That's what im able to collect with a copy paste. After 2 seconds the blank screen appears:

4:45.152    Updated list of uuids with data from github.com/.../v1
14:24:52.672    Selected device with s/n 001050312843
14:24:53.385    Device setup completed
14:24:53.386    Note: Adapters with Segger JLink debug probe requires MSD to be disabled to function properly on MacOS and Linux. Please visit www.nordicsemi.com/nRFConnectOSXfix for further instructions.
14:24:53.386    Getting information from J-Link debugger...
14:24:53.386    Found device type: unknown. J-Link firmware: J-Link OB-nRF5340-NordicSemi compiled Nov 7 2022 16:22:01.
14:24:54.095    Connectivity firmware version: 4.1.4. SoftDevice API version: 5.
14:24:54.097    Opening adapter connected to /dev/ttyACM0

--------------------

-------------------

At some point i was able to get also the following log, but in that case no blank screen appeared, but application still did not go through.

4:27:36.634    [nrfdl][error](14:27:36.518) NRFDLException(10): Device with ID=1 is not existing in device pool.
14:27:36.634    Device programming completed.
14:27:36.634    Device setup completed
14:27:36.634    Note: Adapters with Segger JLink debug probe requires MSD to be disabled to function properly on MacOS and Linux. Please visit www.nordicsemi.com/nRFConnectOSXfix for further instructions.
14:27:36.634    Getting information from J-Link debugger...
14:27:36.634    Found device type: unknown. J-Link firmware: J-Link OB-nRF5340-NordicSemi compiled Nov 7 2022 16:22:01.
14:27:36.634    [nrfdl][error](14:27:36.622) NRFDLException(10): Device with ID=1 is not existing in device pool.

[runsiv]

Thanks, do the blank screen happen just after selecting device, or does it happen before?

Regards

Runar

[gorazd]

just after selecting the device

[runsiv]

Thanks

Could you try to open the app an then disconnect and reconnect the device and then select it and post the logs?

Regards

Runar

[gorazd]

Fullscreen 2023-08-22T07_20_31.797Z-log.txt Download

2023-08-22T07:20:32.124Z DEBUG Application data folder: /home/gorazd/.config/nrfconnect-bluetooth-low-energy/bundle
2023-08-22T07:20:32.200Z INFO Using nrf-device-lib-js version: 0.4.4
2023-08-22T07:20:32.200Z INFO Using nrf-device-lib version: 0.10.3
2023-08-22T07:20:32.200Z INFO Using nrfjprog DLL version: 10.15.1
2023-08-22T07:20:32.200Z INFO Using JLink version: JLink_V7.86e
2023-08-22T07:20:32.207Z DEBUG App pc-nrfconnect-ble v4.0.4 official
2023-08-22T07:20:32.207Z DEBUG App path: /tmp/.mount_nrfcon2XsxeX/resources/app.asar/resources/bundle/
2023-08-22T07:20:32.207Z DEBUG nRFConnect 4.0.4, required by the app is (^3.8.0)
2023-08-22T07:20:32.207Z DEBUG nRFConnect path: /tmp/.mount_nrfcon2XsxeX/resources/app.asar
2023-08-22T07:20:32.207Z DEBUG HomeDir: /home/gorazd
2023-08-22T07:20:32.207Z DEBUG TmpDir: /tmp
2023-08-22T07:20:32.229Z INFO Installed JLink version does not match the provided version (V7.66a)
2023-08-22T07:20:32.232Z INFO Updated list of uuids with data from https://github.com/NordicSemiconductor/bluetooth-numbers-database/tree/master/v1

2023-08-22T07_22_59.745Z-log.txt

Procedure:


* Open nrf connect app

* start Nrf connect for Deskto BLE...

* Recover and disable protection on nrf52 dev board:

gorazd@gorazd-Victus-by-HP-Laptop-16-e0xxx:~$ nrfjprog --recover
Recovering device. This operation might take 30s.
Erasing user code and UICR flash areas.
Writing image to disable ap protect.
gorazd@gorazd-Victus-by-HP-Laptop-16-e0xxx:~$ nrfjprog --memwr 0x10001200 --val 0xfffffffe
Parsing parameters.
Writing.
gorazd@gorazd-Victus-by-HP-Laptop-16-e0xxx:~$


* ABOUT -> verbose logging -> restart with verbose logging


* unplug and plug back in nrf52 dev board into usb port


* Select Device -> NRF52DK -> Device must be prorammed, do you want t proceed? Yes

* BLANK SCREEN