Simple little pcb design for nrf5340 with antenna

[lcj]

Is there a simple PCB I could start with which has a nrf5340 chip on a small pcb with an antenna and usb connector so I could flash it and add components like a motor/vibration or display. Really just for experimenting and replacing a dk+breadboard. Something Ideally I could order it with the parts assembled from pdbway.

[SwRa]

Hi Leo,

The nRF5340-DK is ideally what we would recommend and is the official Nordic product (also Thingy:53 and Audio DK). But I understand that you do not want to use the DK. We don't generally provide recommendations for which third party module one need to use. But there is a list of the 3rd party modules that you could choose from depending on what you require here : https://www.nordicsemi.com/Nordic-Partners/3rd-party-modules You could also take a look at these: https://www.sparkfun.com/categories/tags/nordic Hope this helps.

Best Regards,

Swathy

[lcj]

I am developing on the nRF52 DK with the intention of moving to a custom device (which I certainly cannot build). I wanted to take the intermediate step of creating a simple pcb with minimal components on it. This is new to me but I see others have done it. I was reading the design guidelines and was thinking there might be a good starting point from which I could add one or two components. Something like a catalog of basic starting point designs for the nrf5340 chip.