OpneThread with nRF5340

[Ajit kumar]

Hi 

I've just nrf5340 DK, I am going to start implementing OpenThread on it but I've not found any article on how we can start.

Please provide full article from start and support tools and ide

Thanks & Regards 

Ajit kumar

[Jørgen Holmefjord]

Hi,

nRF5340 is supported in nRF Connect SDK. Please have a look at the documentation and getting started links on this page.

See Protocols->Thread for details about OpenThread support.

Best regards,
Jørgen

[Ajit kumar]

Hi 

after building the cli example getting below error:

2> Linking thread_cli_ftd_uart_pca10056.elf
2> D:/Program Files/SEGGER/SEGGER Embedded Studio 8.10b/gcc/arm-none-eabi/bin/ld: D:/Projects/misc repos/nrf5_sdk_for_thread_and_zigbee_v4.2.0_af27f76/myProjects/thread/cli/ftd/uart/pca10056/blank/ses/Output/Debug/Exe/thread_cli_ftd_uart_pca10056.elf: TLS sections are not adjacent:
2> D:/Program Files/SEGGER/SEGGER Embedded Studio 8.10b/gcc/arm-none-eabi/bin/ld: TLS: .tdata
2> D:/Program Files/SEGGER/SEGGER Embedded Studio 8.10b/gcc/arm-none-eabi/bin/ld: non-TLS: .bss
2> D:/Program Files/SEGGER/SEGGER Embedded Studio 8.10b/gcc/arm-none-eabi/bin/ld: TLS: .tbss
2> D:/Program Files/SEGGER/SEGGER Embedded Studio 8.10b/gcc/arm-none-eabi/bin/ld: map sections to segments failed: bad value
2> Build failed
Build failed

[Jørgen Holmefjord]

Hi,

You are trying to compile an example from nRF5 SDK for Thread and Zigbee v4.2.0, but this SDK does not support nRF5340. You need to follow the guides linked in my previous response to setup nRF Connect SDK, as this SDK variant supports nRF5340 and OpenThread.

Best regards,
Jørgen

[Ajit kumar]

Sure, Thank you for the Support