NRF5340: CIS Groups, and Streams: Stereo headset + stereo gateway + NUS?

[EchoCharlieWhiskey]

I have a CIS gateway (unicast client) and a CIS headset (unicast server). The BLE 5.4 spec seems to say each stream is bi-directional. So for my stereo headset and gateway, that is one CIG with two CIS? If I want them to be always-on, does that mean it needs to be one CIG with four CIS (as shown in the tested topologies)?

What if I want to add NUS? (See Integrate NUS into BLE Audio code post.) Does that consume one directional CIS? Or two CIS? 

Which of these are possible with NRF5340 SDK 2.5.1?

1. Stereo headset and stereo gateway consume two bidirectional CIS. NUS uses one bidirectional CIS. There is CIS one open for the future.
2. Stereo headset and mono gateway consume three CIS. NUS consumes the last one. 
3. NUS consumes two CIS leaving only space for mono headset and mono gateway.

Does it matter what is running on the network core? (I'm planning to use LC3 but haven't gotten the paperwork done.)

Thank you!

ecw

[dejans]

Hi,

You mentioned NCS v2.5.1. However, there were some improvements since then and it is highly recommended that you upgrade to NCS v2.6.0.

You can use one CIG with one stereo CIS or two mono CIS. NUS uses ACL, not ISO, and does not increase the number of CIS/CIG. 

Best regards,
Dejan

[EchoCharlieWhiskey]

I will look into the new SDK. Thank you.

I'm afraid I don't understand about the stereo and mono CIS.

Is it possible to have BAP config 5 with C <--->> S, which is to say mono toward the client (gateway) and stereo to the server (headset)?

Thank you for the fast response! Is there a chart telling me which configs are available for NCS?

[dejans]

Hi,

EchoCharlieWhiskey said:

Is it possible to have BAP config 5 with C <--->> S, which is to say mono toward the client (gateway) and stereo to the server (headset)?

Can you provide a link (or a screenshot) of the BAP specification page you are referring to?

Best regards,
Dejan

[EchoCharlieWhiskey]

Apologies, it was part of the Basic Audio Profile 1.0. Here is a screen shot. 

Do you have a document or chart describing which configs are available for NCS?

Thank you!
ecw

[dejans]

Hi,

From the Table 4.1 in the BAP_v1.0 document, the audio application support 1, 2, 3, 6(ii), 7(ii), 8(ii), 9(ii) and 11(ii).

Best regards,
Dejan

[EchoCharlieWhiskey]

Thank you, Dejan.

From what you are saying, I understand I can't have stereo gateway to headset, mono headset to gateway with one unicast server. (This is surprising as I have it mostly working with only some I2S issues with my external codec. Though I would be worried about not doing supported things. There are many posts here about stereo functionality  (RE: nrf5340 Stereo Audio is the one i used to get stereo to my headset and mono back.)

So you recommend, to get my desired functionality of stereo to headset, mono to gateway, I need to have two servers and use 8ii.

Or if I want to have stereo to headset, stereo to gateway, I need to use two servers and 11ii.

And I need to synchronize the stereo streams?

Does that sound right?

[dejans]

Hi,

Which board do you use?

EchoCharlieWhiskey said:

So you recommend, to get my desired functionality of stereo to headset, mono to gateway, I need to have two servers and use 8ii.

Or if I want to have stereo to headset, stereo to gateway, I need to use two servers and 11ii.

Do you plan to use 2 physical devices in both cases?

Best regards,
Dejan