mesh provisioner problem

[zero]

Dear support team,

1. Can mesh provisioner configure multiple devices at one time? For example, there are five unprovisioned devices within the provisioner's network. Can the provisioner provision the five devices at the same time?
2. How to add multiple "appkey" and "network key" to the provisioner device? For example, provisioner sets appkey1, appkey2...appkeyN; which APIs should be called?

BR,

Zero

[tesc]

Hi,

The provisioner in nRF Connect SDK provisions and configures one device at a time. If there are five unprovisioned devices within range of the provisioner, it can provision all five, not concurrently, but one after the other. For more on the provisioning process, see the Provisioning section of the Bluetooth Mesh stack documentation.

Please note that the configuration is not strictly part of provisioning, but the provisioner typically does some initial configuration right after provisioning. This is also true for the provisioning sample.

You can add new app keys to the configuration database (CDB) through use of cdb_app_key_set().

Regards,
Terje

[zero]

Hi Terje,

If multiple devices cannot be provisioned at the same time, can the provisioning time be shortened? Because my test provisioning a device takes 8 seconds.

BR,

Zero

[tesc]

Hi,

The provisioning phase must be sequential according to the Bluetooth Mesh specification, and therefore cannot be parallelized. However you can speed it up somewhat by enabling the kconfig option CONFIG_BT_MESH_PB_ADV_USE_RELAY_SETS.

It should be possible to parallelize the configuration phase, using asynchronous APIs.

Regards,
Terje

[zero]

Hi Terje,

tesc said:

The provisioning phase must be sequential according to the Bluetooth Mesh specification, and therefore cannot be parallelized. However you can speed it up somewhat by enabling the kconfig option CONFIG_BT_MESH_PB_ADV_USE_RELAY_SETS.

Okay, let me test if it works.

tesc said:

It should be possible to parallelize the configuration phase, using asynchronous APIs.

What are asynchronous APIs? How to do?

BR,

Zero

[tesc]

Hi,

zero said:

What are asynchronous APIs? How to do?

Most of the Configuration Client APIs can be run asynchronously by setting some of their parameters to NULL This is described in the documentation for each function, e.g. "This method can be used asynchronously by setting status as NULL."

Regards,
Terje