BLE OTA DFU using external flash

[allenyang]

I'm using the NCS 2.5.2 sdk and nrf 5340 with 7002, and I want to do BLE OTA DFU using external flash.

I've found this guide Add DFU support to your application - Software - nRF Connect SDK guides - Nordic DevZone (nordicsemi.com), and successfully  done BLE OTA DFU using internal flash, just add the commands below,

#Enable MCUBOOT bootloader build in the application

CONFIG_BOOTLOADER_MCUBOOT=y

#Include MCUMGR and the dependencies in the build

CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU=y

but I don't know how to do with external flash, I've tried looking at main.c in mcuboot, and I didn't find where to modify the code.

[Sigurd Hellesvik]

Hi,

See https://academy.nordicsemi.com/courses/nrf-connect-sdk-intermediate/ instead. This is up to date with the newest nRF Connect SDK.

Regards,
Sigurd Hellesvik

[allenyang]

Hi, when I add the config to the prj.conf and set the devicetree of the external flash, it has few error occur.

prj.conf

#config RTT
CONFIG_LOG=y
CONFIG_LOG_PRINTK=y
# CONFIG_LOG_MODE_DEFERRED=y
CONFIG_UART_CONSOLE=n
CONFIG_USE_SEGGER_RTT=y
CONFIG_RTT_CONSOLE=y
CONFIG_LOG_BACKEND_RTT=y
CONFIG_LOG_BACKEND_UART=n

CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=4096
CONFIG_LOG_BUFFER_SIZE=4096

CONFIG_BT=y
CONFIG_BT_PERIPHERAL=y
CONFIG_BT_DEVICE_NAME="test 0422"
CONFIG_BT_DEVICE_APPEARANCE=833
CONFIG_BT_MAX_CONN=1
CONFIG_BT_MAX_PAIRED=1
CONFIG_HW_ID_LIBRARY=y
CONFIG_HW_ID_LIBRARY_SOURCE_BLE_MAC=y


# # Enable the NUS service
# CONFIG_BT_NUS=y

# # Enable bonding
# CONFIG_BT_SETTINGS=y
# CONFIG_FLASH=y
# CONFIG_FLASH_PAGE_LAYOUT=y
# CONFIG_FLASH_MAP=y
# CONFIG_NVS=y
# CONFIG_SETTINGS=y

#ota
#Enable MCUBOOT bootloader build in the application
CONFIG_BOOTLOADER_MCUBOOT=y
#Include MCUMGR and the dependencies in the build
CONFIG_NCS_SAMPLE_MCUMGR_BT_OTA_DFU=y


CONFIG_NORDIC_QSPI_NOR=n
CONFIG_SPI=y
CONFIG_SPI_NOR=y
CONFIG_SPI_NOR_FLASH_LAYOUT_PAGE_SIZE=4096

# If you don't add this when setting CONFIG_SPI=y, you'll get a lot of undefined references from the nrfx spim driver
# E.G. "undefined reference to `z_impl_k_sleep'"
CONFIG_MULTITHREADING=y
CONFIG_SPI_NOR_SFDP_DEVICETREE=y
CONFIG_PM_OVERRIDE_EXTERNAL_DRIVER_CHECK=y
CONFIG_PM_EXTERNAL_FLASH_MCUBOOT_SECONDARY=y

# Disable internal DCDC
CONFIG_BOARD_ENABLE_DCDC_APP=n
CONFIG_BOARD_ENABLE_DCDC_NET=n
CONFIG_BOARD_ENABLE_DCDC_HV=n

# Use internal capacitor for 32M xtal and set capacitor value to 8.5pF 
# (ranging from 7.0 pF to 20.0 pF in 0.5 pF steps
# can be enabled on pins XC1 and XC2. This option specifies doubled
# capacitance value for the two capacitors. Set it to 14 to get 7.0 pF
# for each capacitor, 15 to get 7.5 pF, and so on.
# )
CONFIG_SOC_HFXO_CAP_INTERNAL=y
CONFIG_SOC_HFXO_CAP_INT_VALUE_X2=17
 
#  Use internal capacitor for 32k xtal and set capacitor value to 7pF 
# (only 4 options of internal capacitor value settings for 32k xtal
#   -INT_6PF
#   -INT_7PF
#   -INT_9PF
#   - USE external capacitor)
CONFIG_SOC_ENABLE_LFXO=y
CONFIG_SOC_LFXO_CAP_INT_7PF=y

device tree

    chosen {

        zephyr,sram = &sram0_image;

        zephyr,flash = &flash0;

        zephyr,code-partition = &slot0_partition;

        zephyr,sram-secure-partition = &sram0_s;

        zephyr,sram-non-secure-partition = &sram0_ns;

        nordic,pm-ext-flash = &mx25l3233;

    };

&spi3 {

    compatible = "nordic,nrf-spim";

    status = "okay";

    pinctrl-0 = <&spi3_default>;

    pinctrl-1 = <&spi3_sleep>;

    pinctrl-names = "default", "sleep";

    cs-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;

    mx25l3233: mx25l3233@0 {

            compatible = "jedec,spi-nor";

            reg = <0>;

            spi-max-frequency = <8000000>;

            label = "extflash";

            jedec-id = [ C2 20 16  ];

            sfdp-bfp = [ E5 20 F1 FF FF FF FF 01 44 EB 08 6B 08 3B 04 BB EE FF 00 00 FF 00 00 FF FF 00 00 FF 0C 20 0F 52 10 D8 00 FF 00 36 50 26 9E F9 77 64 FE CF FF FF FF FF FF FF  ];

            size = <33554432>;

            // has-dpd;

            // t-enter-dpd = <10000>;

            // t-exit-dpd = <35000>;

    };

};

error message

      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:77:30: note: in expansion of macro 'DT_INST_PROP'
   77 | #define INST_0_SCK_FREQUENCY DT_INST_PROP(0, sck_frequency)
      |                              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:82:14: note: in expansion of macro 'INST_0_SCK_FREQUENCY'
   82 | BUILD_ASSERT(INST_0_SCK_FREQUENCY >= (NRF_QSPI_BASE_CLOCK_FREQ / 16),
      |              ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: expression in static assertion is not an integer
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:614:32: note: in expansion of macro 'DT_CAT3'
  614 | #define DT_PROP(node_id, prop) DT_CAT3(node_id, _P_, prop)
      |                                ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:77:30: note: in expansion of macro 'DT_INST_PROP'
   77 | #define INST_0_SCK_FREQUENCY DT_INST_PROP(0, sck_frequency)
      |                              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:82:14: note: in expansion of macro 'INST_0_SCK_FREQUENCY'
   82 | BUILD_ASSERT(INST_0_SCK_FREQUENCY >= (NRF_QSPI_BASE_CLOCK_FREQ / 16),
      |              ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_cpol' undeclared here (not in a function); did you mean 'DT_N_INST_0_nordic_mbox_nrf_ipc'?
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:614:32: note: in expansion of macro 'DT_CAT3'
  614 | #define DT_PROP(node_id, prop) DT_CAT3(node_id, _P_, prop)
      |                                ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:136:14: note: in expansion of macro 'DT_INST_PROP'
  136 | BUILD_ASSERT(DT_INST_PROP(0, cpol) == DT_INST_PROP(0, cpha),
      |              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_cpha' undeclared here (not in a function); did you mean 'DT_N_INST_0_nordic_mbox_nrf_ipc'?
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:614:32: note: in expansion of macro 'DT_CAT3'
  614 | #define DT_PROP(node_id, prop) DT_CAT3(node_id, _P_, prop)
      |                                ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:136:39: note: in expansion of macro 'DT_INST_PROP'
  136 | BUILD_ASSERT(DT_INST_PROP(0, cpol) == DT_INST_PROP(0, cpha),
      |                                       ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: expression in static assertion is not an integer
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:614:32: note: in expansion of macro 'DT_CAT3'
  614 | #define DT_PROP(node_id, prop) DT_CAT3(node_id, _P_, prop)
      |                                ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:136:14: note: in expansion of macro 'DT_INST_PROP'
  136 | BUILD_ASSERT(DT_INST_PROP(0, cpol) == DT_INST_PROP(0, cpha),
      |              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:144:28: error: 'JESD216_DW15_QER_VAL_DT_N_INST_0_nordic_qspi_nor_P_quad_enable_requirements_STRING_TOKEN' undeclared here (not in a function)
  144 | #define INST_0_QER _CONCAT(JESD216_DW15_QER_VAL_, \
      |                            ^~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:160:15: note: in expansion of macro 'IS_EQUAL'
  160 | BUILD_ASSERT((IS_EQUAL(INST_0_QER, JESD216_DW15_QER_VAL_NONE)
      |               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/common.h:133:23: note: in expansion of macro '_DO_CONCAT'
  133 | #define _CONCAT(x, y) _DO_CONCAT(x, y)
      |                       ^~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:144:20: note: in expansion of macro '_CONCAT'
  144 | #define INST_0_QER _CONCAT(JESD216_DW15_QER_VAL_, \
      |                    ^~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:160:24: note: in expansion of macro 'INST_0_QER'
  160 | BUILD_ASSERT((IS_EQUAL(INST_0_QER, JESD216_DW15_QER_VAL_NONE)
      |                        ^~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:160:14: error: expression in static assertion is not an integer
  160 | BUILD_ASSERT((IS_EQUAL(INST_0_QER, JESD216_DW15_QER_VAL_NONE)
      |              ^
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c: In function 'qspi_nor_init':
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_BUS_IRQ_IDX_0_VAL_priority' undeclared (first use in this function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:128:9: note: in expansion of macro '_CHECK_PRIO'
  128 |         _CHECK_PRIO(priority_p, flags_p) \
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/irq.h:49:9: note: in expansion of macro 'ARCH_IRQ_CONNECT'
   49 |         ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:9: note: in expansion of macro 'IRQ_CONNECT'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2383:9: note: in expansion of macro 'DT_CAT5'
 2383 |         DT_CAT5(node_id, _IRQ_IDX_, idx, _VAL_, cell)
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2410:31: note: in expansion of macro 'DT_IRQ_BY_IDX'
 2410 | #define DT_IRQ(node_id, cell) DT_IRQ_BY_IDX(node_id, 0, cell)
      |                               ^~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:41: note: in expansion of macro 'DT_IRQ'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:48: note: in expansion of macro 'QSPI_NODE'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                                                ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: note: each undeclared identifier is reported only once for each function it appears in
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:128:9: note: in expansion of macro '_CHECK_PRIO'
  128 |         _CHECK_PRIO(priority_p, flags_p) \
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/irq.h:49:9: note: in expansion of macro 'ARCH_IRQ_CONNECT'
   49 |         ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:9: note: in expansion of macro 'IRQ_CONNECT'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2383:9: note: in expansion of macro 'DT_CAT5'
 2383 |         DT_CAT5(node_id, _IRQ_IDX_, idx, _VAL_, cell)
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2410:31: note: in expansion of macro 'DT_IRQ_BY_IDX'
 2410 | #define DT_IRQ(node_id, cell) DT_IRQ_BY_IDX(node_id, 0, cell)
      |                               ^~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:41: note: in expansion of macro 'DT_IRQ'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:48: note: in expansion of macro 'QSPI_NODE'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                                                ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:105:22: error: expression in static assertion is not an integer
  105 |         BUILD_ASSERT(((flags_p & IRQ_ZERO_LATENCY) && \
      |                      ^
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:128:9: note: in expansion of macro '_CHECK_PRIO'
  128 |         _CHECK_PRIO(priority_p, flags_p) \
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/irq.h:49:9: note: in expansion of macro 'ARCH_IRQ_CONNECT'
   49 |         ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:9: note: in expansion of macro 'IRQ_CONNECT'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |         ^~~~~~~~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:19,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/arch.h:27,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/arch/cpu.h:19,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/kernel_includes.h:33,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/kernel.h:17,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/pm/device.h:11,
                 from C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:12:
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_BUS_IRQ_IDX_0_VAL_irq' undeclared (first use in this function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sw_isr_table.h:77:26: note: in definition of macro 'Z_ISR_DECLARE'
   77 |                         {irq, flags, (void *)&func, (const void *)param}
      |                          ^~~
C:/ncs/v2.5.2/zephyr/include/zephyr/irq.h:49:9: note: in expansion of macro 'ARCH_IRQ_CONNECT'
   49 |         ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:9: note: in expansion of macro 'IRQ_CONNECT'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2383:9: note: in expansion of macro 'DT_CAT5'
 2383 |         DT_CAT5(node_id, _IRQ_IDX_, idx, _VAL_, cell)
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2410:31: note: in expansion of macro 'DT_IRQ_BY_IDX'
 2410 | #define DT_IRQ(node_id, cell) DT_IRQ_BY_IDX(node_id, 0, cell)
      |                               ^~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2422:26: note: in expansion of macro 'DT_IRQ'
 2422 | #define DT_IRQN(node_id) DT_IRQ(node_id, irq)
      |                          ^~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:21: note: in expansion of macro 'DT_IRQN'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                     ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:29: note: in expansion of macro 'QSPI_NODE'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                             ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c: At top level:
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1262:29: error: 'INST_0_BYTES' undeclared here (not in a function); did you mean 'INST_0_QER'?
 1262 | #define LAYOUT_PAGES_COUNT (INST_0_BYTES / \
      |                             ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1266:15: note: in expansion of macro 'LAYOUT_PAGES_COUNT'
 1266 |               LAYOUT_PAGES_COUNT)
      |               ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1265:14: error: expression in static assertion is not an integer
 1265 | BUILD_ASSERT((CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE *
      |              ^
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: expected ')' before 'DT_N_INST_0_nordic_qspi_nor_BUS_PATH'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:60: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                            ^~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:495:31: note: in expansion of macro 'DT_CAT'
  495 | #define DT_NODE_PATH(node_id) DT_CAT(node_id, _PATH)
      |                               ^~~~~~
c:\ncs\v2.5.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:191:22: note: in expansion of macro 'DT_NODE_PATH'
  191 |                      DT_NODE_PATH(node_id) " defined without sleep state")
      |                      ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1492:1: note: in expansion of macro 'NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP'
 1492 | NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1492:37: note: in expansion of macro 'QSPI_NODE'
 1492 | NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP(QSPI_NODE);
      |                                     ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:50: note: to match this '('
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                  ^
c:\ncs\v2.5.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:189:9: note: in expansion of macro 'BUILD_ASSERT'
  189 |         BUILD_ASSERT(!IS_ENABLED(CONFIG_PM_DEVICE) ||                          \
      |         ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1492:1: note: in expansion of macro 'NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP'
 1492 | NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util.h:17:
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:241:51: error: expected ')' before '(' token
  241 |                      Z_PINCTRL_STATE_PINS_DEFINE, (;), node_id);               \
      |                                                   ^
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:69: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                     ^~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:34:
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:44: warning: implicit declaration of function 'Z_UTIL_LISTIFY_DT_N_INST_0_nordic_qspi_nor_BUS_PINCTRL_NUM' [-Wimplicit-function-declaration]
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                            ^~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:105:36: note: in definition of macro 'UTIL_PRIMITIVE_CAT'
  105 | #define UTIL_PRIMITIVE_CAT(a, ...) a##__VA_ARGS__
      |                                    ^
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:35: note: in expansion of macro 'UTIL_CAT'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                   ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:172:17: note: in expansion of macro 'LISTIFY'
  172 |                 LISTIFY(DT_NUM_PINCTRL_STATES(node_id),                        \
      |                 ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:173:30: error: 'Z_PINCTRL_STATE_INIT' undeclared here (not in a function)
  173 |                              Z_PINCTRL_STATE_INIT, (,), node_id)               \
      |                              ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:66: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                  ^
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:173:53: error: expected expression before ',' token
  173 |                              Z_PINCTRL_STATE_INIT, (,), node_id)               \
      |                                                     ^
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:69: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                     ^~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:173:53: warning: left-hand operand of comma expression has no effect [-Wunused-value]
  173 |                              Z_PINCTRL_STATE_INIT, (,), node_id)               \
      |                                                     ^
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:69: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                     ^~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_BUS' undeclared here (not in a function); did you mean 'DT_N_INST_0_nordic_mbox_nrf_ipc'?
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:74: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:19: note: in expansion of macro 'QSPI_NODE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      |                   ^~~~~~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:92:
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:101:17: error: '__pinctrl_dev_config__device_dts_ord_DT_N_INST_0_nordic_qspi_nor_BUS_ORD' undeclared here (not in a function); did you mean '__pinctrl_states__device_dts_ord_DT_N_INST_0_nordic_qspi_nor_BUS_ORD'?
  101 |         _CONCAT(__pinctrl_dev_config, DEVICE_DT_NAME_GET(node_id))
      |                 ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/common.h:132:26: note: in definition of macro '_DO_CONCAT'
  132 | #define _DO_CONCAT(x, y) x ## y
      |                          ^
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:101:9: note: in expansion of macro '_CONCAT'
  101 |         _CONCAT(__pinctrl_dev_config, DEVICE_DT_NAME_GET(node_id))
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:262:45: note: in expansion of macro 'Z_PINCTRL_DEV_CONFIG_NAME'
  262 | #define PINCTRL_DT_DEV_CONFIG_GET(node_id) &Z_PINCTRL_DEV_CONFIG_NAME(node_id)
      |                                             ^~~~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1499:17: note: in expansion of macro 'PINCTRL_DT_DEV_CONFIG_GET'
 1499 |         .pcfg = PINCTRL_DT_DEV_CONFIG_GET(QSPI_NODE),
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_address_size_32' undeclared here (not in a function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:4231:29: note: in definition of macro 'DT_CAT3'
 4231 | #define DT_CAT3(a1, a2, a3) a1 ## a2 ## a3
      |                             ^~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1511:29: note: in expansion of macro 'DT_INST_PROP'
 1511 |                 .addrmode = DT_INST_PROP(0, address_size_32)
      |                             ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_sck_delay' undeclared here (not in a function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:4231:29: note: in definition of macro 'DT_CAT3'
 4231 | #define DT_CAT3(a1, a2, a3) a1 ## a2 ## a3
      |                             ^~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1517:30: note: in expansion of macro 'DT_INST_PROP'
 1517 |                 .sck_delay = DT_INST_PROP(0, sck_delay),
      |                              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_jedec_id' undeclared here (not in a function); did you mean 'DT_N_INST_0_nordic_nrf_qdec'?
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:4231:29: note: in definition of macro 'DT_CAT3'
 4231 | #define DT_CAT3(a1, a2, a3) a1 ## a2 ## a3
      |                             ^~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1522:15: note: in expansion of macro 'DT_INST_PROP'
 1522 |         .id = DT_INST_PROP(0, jedec_id),
      |               ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_FULL_NAME' undeclared here (not in a function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:892:25: note: in definition of macro 'Z_DEVICE_INIT'
  892 |                 .name = name_,                                                 \
      |                         ^~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:981:9: note: in expansion of macro 'Z_DEVICE_BASE_DEFINE'
  981 |         Z_DEVICE_BASE_DEFINE(node_id, dev_id, name, pm, data, config, level,   \
      |         ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:180:9: note: in expansion of macro 'Z_DEVICE_DEFINE'
  180 |         Z_DEVICE_DEFINE(node_id, Z_DEVICE_DT_DEV_ID(node_id),                  \
      |         ^~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:69:53: note: in expansion of macro '__DEBRACKET'
   69 | #define __GET_ARG2_DEBRACKET(ignore_this, val, ...) __DEBRACKET val
      |                                                     ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:64:9: note: in expansion of macro '__GET_ARG2_DEBRACKET'
   64 |         __GET_ARG2_DEBRACKET(one_or_two_args _if_code, _else_code)
      |         ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:59:9: note: in expansion of macro '__COND_CODE'
   59 |         __COND_CODE(_XXXX##_flag, _if_1_code, _else_code)
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:180:9: note: in expansion of macro 'Z_COND_CODE_1'
  180 |         Z_COND_CODE_1(_flag, _if_1_code, _else_code)
      |         ^~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:777:9: note: in expansion of macro 'COND_CODE_1'
  777 |         COND_CODE_1(DT_NODE_HAS_PROP(node_id, prop), \
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:146:9: note: in expansion of macro 'DT_PROP_OR'
  146 |         DT_PROP_OR(node_id, label, DT_NODE_FULL_NAME(node_id))
      |         ^~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:521:36: note: in expansion of macro 'DT_CAT'
  521 | #define DT_NODE_FULL_NAME(node_id) DT_CAT(node_id, _FULL_NAME)
      |                                    ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:146:36: note: in expansion of macro 'DT_NODE_FULL_NAME'
  146 |         DT_PROP_OR(node_id, label, DT_NODE_FULL_NAME(node_id))
      |                                    ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:181:25: note: in expansion of macro 'DEVICE_DT_NAME'
  181 |                         DEVICE_DT_NAME(node_id), init_fn, pm, data, config,    \
      |                         ^~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:195:9: note: in expansion of macro 'DEVICE_DT_DEFINE'
  195 |         DEVICE_DT_DEFINE(DT_DRV_INST(inst), __VA_ARGS__)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:195:26: note: in expansion of macro 'DT_DRV_INST'
  195 |         DEVICE_DT_DEFINE(DT_DRV_INST(inst), __VA_ARGS__)
      |                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1527:1: note: in expansion of macro 'DEVICE_DT_INST_DEFINE'
 1527 | DEVICE_DT_INST_DEFINE(0, qspi_nor_init, PM_DEVICE_DT_INST_GET(0),
      | ^~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:110:17: warning: '__pinctrl_states__device_dts_ord_DT_N_INST_0_nordic_qspi_nor_BUS_ORD' defined but not used [-Wunused-const-variable=]
  110 |         _CONCAT(__pinctrl_states, DEVICE_DT_NAME_GET(node_id))
      |                 ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/common.h:132:26: note: in definition of macro '_DO_CONCAT'
  132 | #define _DO_CONCAT(x, y) x ## y
      |                          ^
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:110:9: note: in expansion of macro '_CONCAT'
  110 |         _CONCAT(__pinctrl_states, DEVICE_DT_NAME_GET(node_id))
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:171:9: note: in expansion of macro 'Z_PINCTRL_STATES_NAME'
  171 |         Z_PINCTRL_STATES_NAME(node_id)[] = {                                   \
      |         ^~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
[179/281] Linking C static library zephyr\libzephyr.a
FAILED: modules/mcuboot/mcuboot_subimage-prefix/src/mcuboot_subimage-stamp/mcuboot_subimage-build mcuboot/zephyr/zephyr.hex mcuboot/zephyr/zephyr.elf 

[Sigurd Hellesvik]

allenyang said:

CONFIG_BT=y

CONFIG_BT_PERIPHERAL=y

CONFIG_BT_DEVICE_NAME="test"

CONFIG_BT_DEVICE_APPEARANCE=833

CONFIG_BT_MAX_CONN=1

CONFIG_BT_MAX_PAIRED=1

CONFIG_HW_ID_LIBRARY=y

CONFIG_HW_ID_LIBRARY_SOURCE_BLE_MAC=y

Let us simplify:

Only CONFIG_BT=y should be enough to add a network core image automatically.
Try to add only that, so we can make sure the other configs do not interfere.

[allenyang]

Hi, I tried the way you said,

when I only added  CONFIG_BT=y, it successfully build.

but when adding CONFIG_BT_PERIPHERAL=y , the errors occur.

so it seems doesn't affect by network core image?

[Sigurd Hellesvik]

This could maybe be related to configuration ordering
Could you provide an overview over your project configuration and custom board configuration?
(Folder structure and such)

[allenyang]

1261.hello_world_1.zipHi, thanks

regards,

Allen

[Sigurd Hellesvik]

Ah, you should look at your build log, and specifically Kconfig override warnings

[allenyang]

now I know what's the problem.

when only add config_bt, it said missing dependencies config_bt_peripheral, so it didn't add config_bt_ota then build success.

but when add config_bt_ota successfully, then build error.

so why the errors occur?

12/296] Generating include/generated/version.h
-- Zephyr version: 3.4.99 (C:/ncs/v2.5.2/zephyr), build: 4b5ef270413a
[84/296] Building C object CMakeFiles/app.dir/src/main.c.obj
../src/main.c:23:1: warning: multi-line comment [-Wcomment]
   23 | // #define advertising_parameter BT_LE_ADV_PARAM(BT_LE_ADV_OPT_CONNECTABLE | \
      | ^
[97/296] Building C object zephyr/drivers/flash/CMakeFiles/drivers__flash.dir/nrf_qspi_nor.c.obj
FAILED: zephyr/drivers/flash/CMakeFiles/drivers__flash.dir/nrf_qspi_nor.c.obj 
C:\ncs\toolchains\c57af46cb7\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe -DKERNEL -DNRF5340_XXAA_APPLICATION -DNRF_SKIP_FICR_NS_COPY_TO_RAM -DPICOLIBC_INTEGER_PRINTF_SCANF -DUSE_PARTITION_MANAGER=1 -D_FORTIFY_SOURCE=1 -D_POSIX_C_SOURCE=200809 -D__LINUX_ERRNO_EXTENSIONS__ -D__PROGRAM_START -D__ZEPHYR_SUPERVISOR__ -D__ZEPHYR__=1 -IC:/ncs/v2.5.2/zephyr/include -Izephyr/include/generated -IC:/ncs/v2.5.2/zephyr/soc/arm/nordic_nrf/nrf53 -IC:/ncs/v2.5.2/zephyr/soc/arm/nordic_nrf/common/. -IC:/ncs/v2.5.2/zephyr/subsys/mgmt/mcumgr/util/include -IC:/ncs/v2.5.2/bootloader/mcuboot/boot/bootutil/include -IC:/ncs/v2.5.2/zephyr/subsys/mgmt/mcumgr/transport/include -IC:/ncs/v2.5.2/bootloader/mcuboot/boot/zephyr/include -IC:/ncs/v2.5.2/zephyr/subsys/bluetooth -IC:/ncs/v2.5.2/nrf/include -IC:/ncs/v2.5.2/nrf/tests/include -IC:/ncs/v2.5.2/modules/hal/cmsis/CMSIS/Core/Include -IC:/ncs/v2.5.2/zephyr/modules/cmsis/. -IC:/ncs/v2.5.2/modules/hal/nordic/nrfx -IC:/ncs/v2.5.2/modules/hal/nordic/nrfx/drivers/include -IC:/ncs/v2.5.2/modules/hal/nordic/nrfx/mdk -IC:/ncs/v2.5.2/zephyr/modules/hal_nordic/nrfx/. -Imodules/libmetal/libmetal/lib/include -IC:/ncs/v2.5.2/modules/lib/open-amp/open-amp/lib/include -IC:/ncs/v2.5.2/modules/debug/segger/SEGGER -IC:/ncs/v2.5.2/modules/debug/segger/Config -IC:/ncs/v2.5.2/modules/crypto/tinycrypt/lib/include -IC:/ncs/v2.5.2/modules/lib/zcbor/include -IC:/ncs/v2.5.2/nrfxlib/softdevice_controller/include -isystem C:/ncs/v2.5.2/nrfxlib/crypto/nrf_cc312_platform/include -Wshadow -fno-strict-aliasing -Os -imacros C:/nordic20240328/hello_world_1/build_8/zephyr/include/generated/autoconf.h -fno-printf-return-value -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33 -mthumb -mabi=aapcs -mfp16-format=ieee --sysroot=C:/ncs/toolchains/c57af46cb7/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi -imacros C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-unused-but-set-variable -Werror=implicit-int -fno-pic -fno-pie -fno-asynchronous-unwind-tables -ftls-model=local-exec -fno-reorder-functions --param=min-pagesize=0 -fno-defer-pop -fmacro-prefix-map=C:/nordic20240328/hello_world_1=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/ncs/v2.5.2/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/ncs/v2.5.2=WEST_TOPDIR -ffunction-sections -fdata-sections --specs=picolibc.specs -std=c99 -MD -MT zephyr/drivers/flash/CMakeFiles/drivers__flash.dir/nrf_qspi_nor.c.obj -MF zephyr\drivers\flash\CMakeFiles\drivers__flash.dir\nrf_qspi_nor.c.obj.d -o zephyr/drivers/flash/CMakeFiles/drivers__flash.dir/nrf_qspi_nor.c.obj -c C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:69:2: error: #error "No size specified. 'size' or 'size-in-bytes' must be set"
   69 | #error "No size specified. 'size' or 'size-in-bytes' must be set"
      |  ^~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain.h:50,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/sys/time_units.h:10,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util.h:615,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:25,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:12,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/flash.h:28,
                 from C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:10:
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: expected ')' before 'DT_N_INST_0_nordic_qspi_nor_PATH'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:60: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                            ^~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:495:31: note: in expansion of macro 'DT_CAT'
  495 | #define DT_NODE_PATH(node_id) DT_CAT(node_id, _PATH)
      |                               ^~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:73:22: note: in expansion of macro 'DT_NODE_PATH'
   73 |              "Node " DT_NODE_PATH(DT_DRV_INST(0)) " has both size and size-in-bytes "
      |                      ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:73:35: note: in expansion of macro 'DT_DRV_INST'
   73 |              "Node " DT_NODE_PATH(DT_DRV_INST(0)) " has both size and size-in-bytes "
      |                                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:50: note: to match this '('
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                  ^
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:72:1: note: in expansion of macro 'BUILD_ASSERT'
   72 | BUILD_ASSERT(!(DT_INST_NODE_HAS_PROP(0, size_in_bytes) && DT_INST_NODE_HAS_PROP(0, size)),
      | ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_sck_frequency' undeclared here (not in a function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:614:32: note: in expansion of macro 'DT_CAT3'
  614 | #define DT_PROP(node_id, prop) DT_CAT3(node_id, _P_, prop)
      |                                ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:77:30: note: in expansion of macro 'DT_INST_PROP'
   77 | #define INST_0_SCK_FREQUENCY DT_INST_PROP(0, sck_frequency)
      |                              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:82:14: note: in expansion of macro 'INST_0_SCK_FREQUENCY'
   82 | BUILD_ASSERT(INST_0_SCK_FREQUENCY >= (NRF_QSPI_BASE_CLOCK_FREQ / 16),
      |              ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: expression in static assertion is not an integer
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:614:32: note: in expansion of macro 'DT_CAT3'
  614 | #define DT_PROP(node_id, prop) DT_CAT3(node_id, _P_, prop)
      |                                ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:77:30: note: in expansion of macro 'DT_INST_PROP'
   77 | #define INST_0_SCK_FREQUENCY DT_INST_PROP(0, sck_frequency)
      |                              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:82:14: note: in expansion of macro 'INST_0_SCK_FREQUENCY'
   82 | BUILD_ASSERT(INST_0_SCK_FREQUENCY >= (NRF_QSPI_BASE_CLOCK_FREQ / 16),
      |              ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_cpol' undeclared here (not in a function); did you mean 'DT_N_INST_0_nordic_mbox_nrf_ipc'?
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:614:32: note: in expansion of macro 'DT_CAT3'
  614 | #define DT_PROP(node_id, prop) DT_CAT3(node_id, _P_, prop)
      |                                ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:136:14: note: in expansion of macro 'DT_INST_PROP'
  136 | BUILD_ASSERT(DT_INST_PROP(0, cpol) == DT_INST_PROP(0, cpha),
      |              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_cpha' undeclared here (not in a function); did you mean 'DT_N_INST_0_nordic_mbox_nrf_ipc'?
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:614:32: note: in expansion of macro 'DT_CAT3'
  614 | #define DT_PROP(node_id, prop) DT_CAT3(node_id, _P_, prop)
      |                                ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:136:39: note: in expansion of macro 'DT_INST_PROP'
  136 | BUILD_ASSERT(DT_INST_PROP(0, cpol) == DT_INST_PROP(0, cpha),
      |                                       ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: expression in static assertion is not an integer
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:614:32: note: in expansion of macro 'DT_CAT3'
  614 | #define DT_PROP(node_id, prop) DT_CAT3(node_id, _P_, prop)
      |                                ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:136:14: note: in expansion of macro 'DT_INST_PROP'
  136 | BUILD_ASSERT(DT_INST_PROP(0, cpol) == DT_INST_PROP(0, cpha),
      |              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:144:28: error: 'JESD216_DW15_QER_VAL_DT_N_INST_0_nordic_qspi_nor_P_quad_enable_requirements_STRING_TOKEN' undeclared here (not in a function)
  144 | #define INST_0_QER _CONCAT(JESD216_DW15_QER_VAL_, \
      |                            ^~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:160:15: note: in expansion of macro 'IS_EQUAL'
  160 | BUILD_ASSERT((IS_EQUAL(INST_0_QER, JESD216_DW15_QER_VAL_NONE)
      |               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/common.h:133:23: note: in expansion of macro '_DO_CONCAT'
  133 | #define _CONCAT(x, y) _DO_CONCAT(x, y)
      |                       ^~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:144:20: note: in expansion of macro '_CONCAT'
  144 | #define INST_0_QER _CONCAT(JESD216_DW15_QER_VAL_, \
      |                    ^~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:160:24: note: in expansion of macro 'INST_0_QER'
  160 | BUILD_ASSERT((IS_EQUAL(INST_0_QER, JESD216_DW15_QER_VAL_NONE)
      |                        ^~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:160:14: error: expression in static assertion is not an integer
  160 | BUILD_ASSERT((IS_EQUAL(INST_0_QER, JESD216_DW15_QER_VAL_NONE)
      |              ^
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c: In function 'qspi_nor_init':
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_BUS_IRQ_IDX_0_VAL_priority' undeclared (first use in this function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:128:9: note: in expansion of macro '_CHECK_PRIO'
  128 |         _CHECK_PRIO(priority_p, flags_p) \
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/irq.h:49:9: note: in expansion of macro 'ARCH_IRQ_CONNECT'
   49 |         ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:9: note: in expansion of macro 'IRQ_CONNECT'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2383:9: note: in expansion of macro 'DT_CAT5'
 2383 |         DT_CAT5(node_id, _IRQ_IDX_, idx, _VAL_, cell)
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2410:31: note: in expansion of macro 'DT_IRQ_BY_IDX'
 2410 | #define DT_IRQ(node_id, cell) DT_IRQ_BY_IDX(node_id, 0, cell)
      |                               ^~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:41: note: in expansion of macro 'DT_IRQ'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:48: note: in expansion of macro 'QSPI_NODE'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                                                ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: note: each undeclared identifier is reported only once for each function it appears in
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:128:9: note: in expansion of macro '_CHECK_PRIO'
  128 |         _CHECK_PRIO(priority_p, flags_p) \
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/irq.h:49:9: note: in expansion of macro 'ARCH_IRQ_CONNECT'
   49 |         ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:9: note: in expansion of macro 'IRQ_CONNECT'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2383:9: note: in expansion of macro 'DT_CAT5'
 2383 |         DT_CAT5(node_id, _IRQ_IDX_, idx, _VAL_, cell)
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2410:31: note: in expansion of macro 'DT_IRQ_BY_IDX'
 2410 | #define DT_IRQ(node_id, cell) DT_IRQ_BY_IDX(node_id, 0, cell)
      |                               ^~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:41: note: in expansion of macro 'DT_IRQ'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:48: note: in expansion of macro 'QSPI_NODE'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                                                ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:105:22: error: expression in static assertion is not an integer
  105 |         BUILD_ASSERT(((flags_p & IRQ_ZERO_LATENCY) && \
      |                      ^
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:128:9: note: in expansion of macro '_CHECK_PRIO'
  128 |         _CHECK_PRIO(priority_p, flags_p) \
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/irq.h:49:9: note: in expansion of macro 'ARCH_IRQ_CONNECT'
   49 |         ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:9: note: in expansion of macro 'IRQ_CONNECT'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |         ^~~~~~~~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/irq.h:19,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/arch/arm/aarch32/arch.h:27,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/arch/cpu.h:19,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/kernel_includes.h:33,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/kernel.h:17,
                 from C:/ncs/v2.5.2/zephyr/include/zephyr/pm/device.h:11,
                 from C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:12:
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_BUS_IRQ_IDX_0_VAL_irq' undeclared (first use in this function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sw_isr_table.h:77:26: note: in definition of macro 'Z_ISR_DECLARE'
   77 |                         {irq, flags, (void *)&func, (const void *)param}
      |                          ^~~
C:/ncs/v2.5.2/zephyr/include/zephyr/irq.h:49:9: note: in expansion of macro 'ARCH_IRQ_CONNECT'
   49 |         ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:9: note: in expansion of macro 'IRQ_CONNECT'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2383:9: note: in expansion of macro 'DT_CAT5'
 2383 |         DT_CAT5(node_id, _IRQ_IDX_, idx, _VAL_, cell)
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2410:31: note: in expansion of macro 'DT_IRQ_BY_IDX'
 2410 | #define DT_IRQ(node_id, cell) DT_IRQ_BY_IDX(node_id, 0, cell)
      |                               ^~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:2422:26: note: in expansion of macro 'DT_IRQ'
 2422 | #define DT_IRQN(node_id) DT_IRQ(node_id, irq)
      |                          ^~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:21: note: in expansion of macro 'DT_IRQN'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                     ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1242:29: note: in expansion of macro 'QSPI_NODE'
 1242 |         IRQ_CONNECT(DT_IRQN(QSPI_NODE), DT_IRQ(QSPI_NODE, priority),
      |                             ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c: At top level:
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1262:29: error: 'INST_0_BYTES' undeclared here (not in a function); did you mean 'INST_0_QER'?
 1262 | #define LAYOUT_PAGES_COUNT (INST_0_BYTES / \
      |                             ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1266:15: note: in expansion of macro 'LAYOUT_PAGES_COUNT'
 1266 |               LAYOUT_PAGES_COUNT)
      |               ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1265:14: error: expression in static assertion is not an integer
 1265 | BUILD_ASSERT((CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE *
      |              ^
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:51: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                   ^~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: expected ')' before 'DT_N_INST_0_nordic_qspi_nor_BUS_PATH'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:60: note: in definition of macro 'BUILD_ASSERT'
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                            ^~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:495:31: note: in expansion of macro 'DT_CAT'
  495 | #define DT_NODE_PATH(node_id) DT_CAT(node_id, _PATH)
      |                               ^~~~~~
c:\ncs\v2.5.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:191:22: note: in expansion of macro 'DT_NODE_PATH'
  191 |                      DT_NODE_PATH(node_id) " defined without sleep state")
      |                      ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1492:1: note: in expansion of macro 'NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP'
 1492 | NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1492:37: note: in expansion of macro 'QSPI_NODE'
 1492 | NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP(QSPI_NODE);
      |                                     ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:50: note: to match this '('
   81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
      |                                                  ^
c:\ncs\v2.5.2\zephyr\soc\arm\nordic_nrf\common\soc_nrf_common.h:189:9: note: in expansion of macro 'BUILD_ASSERT'
  189 |         BUILD_ASSERT(!IS_ENABLED(CONFIG_PM_DEVICE) ||                          \
      |         ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1492:1: note: in expansion of macro 'NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP'
 1492 | NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP(QSPI_NODE);
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\c57af46cb7\opt\bin\cmake.EXE' --build 'c:\nordic20240328\hello_world_1\build_8'
      | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util.h:17:
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:241:51: error: expected ')' before '(' token
  241 |                      Z_PINCTRL_STATE_PINS_DEFINE, (;), node_id);               \
      |                                                   ^
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:69: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                     ^~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:34:
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:44: warning: implicit declaration of function 'Z_UTIL_LISTIFY_DT_N_INST_0_nordic_qspi_nor_BUS_PINCTRL_NUM' [-Wimplicit-function-declaration]
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                            ^~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:105:36: note: in definition of macro 'UTIL_PRIMITIVE_CAT'
  105 | #define UTIL_PRIMITIVE_CAT(a, ...) a##__VA_ARGS__
      |                                    ^
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:35: note: in expansion of macro 'UTIL_CAT'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                   ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:172:17: note: in expansion of macro 'LISTIFY'
  172 |                 LISTIFY(DT_NUM_PINCTRL_STATES(node_id),                        \
      |                 ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:173:30: error: 'Z_PINCTRL_STATE_INIT' undeclared here (not in a function)
  173 |                              Z_PINCTRL_STATE_INIT, (,), node_id)               \
      |                              ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:66: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                  ^
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:173:53: error: expected expression before ',' token
  173 |                              Z_PINCTRL_STATE_INIT, (,), node_id)               \
      |                                                     ^
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:69: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                     ^~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:173:53: warning: left-hand operand of comma expression has no effect [-Wunused-value]
  173 |                              Z_PINCTRL_STATE_INIT, (,), node_id)               \
      |                                                     ^
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:69: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                     ^~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_BUS' undeclared here (not in a function); did you mean 'DT_N_INST_0_nordic_mbox_nrf_ipc'?
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:418:74: note: in definition of macro 'LISTIFY'
  418 | #define LISTIFY(LEN, F, sep, ...) UTIL_CAT(Z_UTIL_LISTIFY_, LEN)(F, sep, __VA_ARGS__)
      |                                                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3190:25: note: in expansion of macro 'DT_CAT'
 3190 | #define DT_BUS(node_id) DT_CAT(node_id, _BUS)
      |                         ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:27: note: in expansion of macro 'DT_BUS'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                           ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3836:34: note: in expansion of macro 'DT_DRV_INST'
 3836 | #define DT_INST_BUS(inst) DT_BUS(DT_DRV_INST(inst))
      |                                  ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:140:19: note: in expansion of macro 'DT_INST_BUS'
  140 | #define QSPI_NODE DT_INST_BUS(0)
      |                   ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:19: note: in expansion of macro 'QSPI_NODE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      |                   ^~~~~~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:92:
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:101:17: error: '__pinctrl_dev_config__device_dts_ord_DT_N_INST_0_nordic_qspi_nor_BUS_ORD' undeclared here (not in a function); did you mean '__pinctrl_states__device_dts_ord_DT_N_INST_0_nordic_qspi_nor_BUS_ORD'?
  101 |         _CONCAT(__pinctrl_dev_config, DEVICE_DT_NAME_GET(node_id))
      |                 ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/common.h:132:26: note: in definition of macro '_DO_CONCAT'
  132 | #define _DO_CONCAT(x, y) x ## y
      |                          ^
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:101:9: note: in expansion of macro '_CONCAT'
  101 |         _CONCAT(__pinctrl_dev_config, DEVICE_DT_NAME_GET(node_id))
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:262:45: note: in expansion of macro 'Z_PINCTRL_DEV_CONFIG_NAME'
  262 | #define PINCTRL_DT_DEV_CONFIG_GET(node_id) &Z_PINCTRL_DEV_CONFIG_NAME(node_id)
      |                                             ^~~~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1499:17: note: in expansion of macro 'PINCTRL_DT_DEV_CONFIG_GET'
 1499 |         .pcfg = PINCTRL_DT_DEV_CONFIG_GET(QSPI_NODE),
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_address_size_32' undeclared here (not in a function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:4231:29: note: in definition of macro 'DT_CAT3'
 4231 | #define DT_CAT3(a1, a2, a3) a1 ## a2 ## a3
      |                             ^~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1511:29: note: in expansion of macro 'DT_INST_PROP'
 1511 |                 .addrmode = DT_INST_PROP(0, address_size_32)
      |                             ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_sck_delay' undeclared here (not in a function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:4231:29: note: in definition of macro 'DT_CAT3'
 4231 | #define DT_CAT3(a1, a2, a3) a1 ## a2 ## a3
      |                             ^~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1517:30: note: in expansion of macro 'DT_INST_PROP'
 1517 |                 .sck_delay = DT_INST_PROP(0, sck_delay),
      |                              ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_P_jedec_id' undeclared here (not in a function); did you mean 'DT_N_INST_0_nordic_nrf_qdec'?
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:4231:29: note: in definition of macro 'DT_CAT3'
 4231 | #define DT_CAT3(a1, a2, a3) a1 ## a2 ## a3
      |                             ^~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:34: note: in expansion of macro 'DT_PROP'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                  ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3450:42: note: in expansion of macro 'DT_DRV_INST'
 3450 | #define DT_INST_PROP(inst, prop) DT_PROP(DT_DRV_INST(inst), prop)
      |                                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1522:15: note: in expansion of macro 'DT_INST_PROP'
 1522 |         .id = DT_INST_PROP(0, jedec_id),
      |               ^~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: 'DT_N_INST_0_nordic_qspi_nor_FULL_NAME' undeclared here (not in a function)
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                                        ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:892:25: note: in definition of macro 'Z_DEVICE_INIT'
  892 |                 .name = name_,                                                 \
      |                         ^~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:981:9: note: in expansion of macro 'Z_DEVICE_BASE_DEFINE'
  981 |         Z_DEVICE_BASE_DEFINE(node_id, dev_id, name, pm, data, config, level,   \
      |         ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:180:9: note: in expansion of macro 'Z_DEVICE_DEFINE'
  180 |         Z_DEVICE_DEFINE(node_id, Z_DEVICE_DT_DEV_ID(node_id),                  \
      |         ^~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:69:53: note: in expansion of macro '__DEBRACKET'
   69 | #define __GET_ARG2_DEBRACKET(ignore_this, val, ...) __DEBRACKET val
      |                                                     ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:64:9: note: in expansion of macro '__GET_ARG2_DEBRACKET'
   64 |         __GET_ARG2_DEBRACKET(one_or_two_args _if_code, _else_code)
      |         ^~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:59:9: note: in expansion of macro '__COND_CODE'
   59 |         __COND_CODE(_XXXX##_flag, _if_1_code, _else_code)
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_macro.h:180:9: note: in expansion of macro 'Z_COND_CODE_1'
  180 |         Z_COND_CODE_1(_flag, _if_1_code, _else_code)
      |         ^~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:777:9: note: in expansion of macro 'COND_CODE_1'
  777 |         COND_CODE_1(DT_NODE_HAS_PROP(node_id, prop), \
      |         ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:146:9: note: in expansion of macro 'DT_PROP_OR'
  146 |         DT_PROP_OR(node_id, label, DT_NODE_FULL_NAME(node_id))
      |         ^~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:521:36: note: in expansion of macro 'DT_CAT'
  521 | #define DT_NODE_FULL_NAME(node_id) DT_CAT(node_id, _FULL_NAME)
      |                                    ^~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:146:36: note: in expansion of macro 'DT_NODE_FULL_NAME'
  146 |         DT_PROP_OR(node_id, label, DT_NODE_FULL_NAME(node_id))
      |                                    ^~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:181:25: note: in expansion of macro 'DEVICE_DT_NAME'
  181 |                         DEVICE_DT_NAME(node_id), init_fn, pm, data, config,    \
      |                         ^~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:195:9: note: in expansion of macro 'DEVICE_DT_DEFINE'
  195 |         DEVICE_DT_DEFINE(DT_DRV_INST(inst), __VA_ARGS__)
      |         ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util_internal.h:104:26: note: in expansion of macro 'UTIL_PRIMITIVE_CAT'
  104 | #define UTIL_CAT(a, ...) UTIL_PRIMITIVE_CAT(a, __VA_ARGS__)
      |                          ^~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:31: note: in expansion of macro 'UTIL_CAT'
  333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
      |                               ^~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:3248:27: note: in expansion of macro 'DT_INST'
 3248 | #define DT_DRV_INST(inst) DT_INST(inst, DT_DRV_COMPAT)
      |                           ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:195:26: note: in expansion of macro 'DT_DRV_INST'
  195 |         DEVICE_DT_DEFINE(DT_DRV_INST(inst), __VA_ARGS__)
      |                          ^~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1527:1: note: in expansion of macro 'DEVICE_DT_INST_DEFINE'
 1527 | DEVICE_DT_INST_DEFINE(0, qspi_nor_init, PM_DEVICE_DT_INST_GET(0),
      | ^~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:110:17: warning: '__pinctrl_states__device_dts_ord_DT_N_INST_0_nordic_qspi_nor_BUS_ORD' defined but not used [-Wunused-const-variable=]
  110 |         _CONCAT(__pinctrl_states, DEVICE_DT_NAME_GET(node_id))
      |                 ^~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/common.h:132:26: note: in definition of macro '_DO_CONCAT'
  132 | #define _DO_CONCAT(x, y) x ## y
      |                          ^
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:110:9: note: in expansion of macro '_CONCAT'
  110 |         _CONCAT(__pinctrl_states, DEVICE_DT_NAME_GET(node_id))
      |         ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:171:9: note: in expansion of macro 'Z_PINCTRL_STATES_NAME'
  171 |         Z_PINCTRL_STATES_NAME(node_id)[] = {                                   \
      |         ^~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
  242 |         Z_PINCTRL_STATES_DEFINE(node_id)                                       \
      |         ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
 1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
      | ^~~~~~~~~~~~~~~~~

 

and config_spi_nor has some problem,

is it the reason of the error?

[Sigurd Hellesvik]

allenyang said:

and config_spi_nor has some problem,

is it the reason of the error?

Have you set up external flash in DTS?

[allenyang]

Yes, I had set it.

Is it wrong?

[Sigurd Hellesvik]

It looks good to me.

From External flash memory partitions:

"f the external flash device is not using the QSPI NOR driver, you must enable CONFIG_PM_OVERRIDE_EXTERNAL_DRIVER_CHECK to override the Partition Manager’s external flash driver check, and the required driver must also be enabled for all applications that need it."

Try to set that configuration, I suspect that should do it.

I realized this as your log was complaining about QSPI drivers were missing, and this would explain why it tried to access QSPI flash while you have SPI flash in the DTS

[allenyang]

Hi, I've seen the article, so I had added the line "CONFIG_PM_OVERRIDE_EXTERNAL_DRIVER_CHECK" to both prj.conf and mcuboot.conf,

but it still has same error.