Hi,
Starting from the AWS IoT sample, I’m having a hard time configuring the connection before calling net_if_up() which abstracts a lot of stuff. I would like to configure the APN and authentication information. I have tried enabling the PDN library and calling pdn_ctx_configure() (and pdn_ctx_auth_set()), but whatever APN I give it (“ibasis.iot” in my case, with the SIM shipped with the nRF9160DK) stops the network connection. Here is the AT_HOST log I’m getting:
[00:00:04.934,082] <dbg> pdn: on_cfun: Subscribing to +CNEC=16 and +CGEREP=1 +CEREG: 2,"7F1A","08561906",7 +CSCON: 1 +CNEC_ESM: 33,0 (Requested service option not subscribed) +CEREG: 2,"7F1A","08561906",7,0,19 +CSCON: 0 +CEREG: 2,"BEB8","09743A06",7 +CSCON: 1 +CNEC_ESM: 27,0 +CEREG: 2,"BEB8","09743A06",7,0,19 +CSCON: 0 …
When I’m not calling pdn_ctx_configure(), I’m getting this log instead:
com [00:00:04.926,879] <dbg> pdn: on_cfun: Subscribing to +CNEC=16 and +CGEREP=1 +CEREG: 2,"7F1A","08561906",7 +CSCON: 1 +CGEV: ME PDN ACT 0,0 +CNEC_ESM: 50,0 (PDN type IPv4 only allowed) +CEREG: 5,"7F1A","08561906",7,,,"11100000","11100000" [00:00:19.462,951] <inf> aerobox_network: Got an IP address: [00:00:19.463,256] <inf> aerobox_network: Network connectivity established
I don’t have an easy access to the modem trace alongside the terminal as I am running on a custom board with only one VCOM.
Am I missing something? Do I need to redo everything according to the PDN sample? In that case will the rest of the code properly work (sockets calls and such)?
Thanks!
