Unable to use uart ,I2c,SPI together as shown in the error message. I am attaching the dts overlay file
// To get started, press Ctrl+Space to bring up the completion menu and view the available nodes. // You can also use the buttons in the sidebar to perform actions on nodes. // Actions currently available include: // * Enabling / disabling the node // * Adding the bus to a bus // * Removing the node // * Connecting ADC channels // For more help, browse the DeviceTree documentation at https://docs.zephyrproject.org/latest/guides/dts/index.html // You can also visit the nRF DeviceTree extension documentation at https://nrfconnect.github.io/vscode-nrf-connect/devicetree/nrfdevicetree.html &uart1 { status = "okay"; }; &pinctrl { uart2_default: uart2_default { group1 { psels = <NRF_PSEL(UART_TX, 0, 24)>, <NRF_PSEL(UART_RX, 0, 23)>; bias-pull-up; }; }; uart2_sleep: uart2_sleep { group1 { psels = <NRF_PSEL(UART_TX, 0, 24)>, <NRF_PSEL(UART_RX, 0, 23)>; low-power-enable; }; }; }; &uart2 { status = "okay"; current-speed = <115200>; }; &i2c2_default { status = "okay"; group1 { psels = <NRF_PSEL(TWIM_SDA, 0, 30)>, <NRF_PSEL(TWIM_SCL, 0, 0)>; }; }; &i2c2 { status = "okay"; }; &spi3 { status = "okay"; }; &i2c1 { status = "disabled"; }; &i2c0 { status = "disabled"; }; &i2c3 { status = "disabled"; };
Is there any way to use all UART,SPI,I2C together. Please let me know if you need any further details or explanations regarding this issue.