Is it possible to connect to any wifi network directly without connecting to bluetooth (which happens in wifi provisioning)?
Is it possible to connect to any wifi network directly without connecting to bluetooth (which happens in wifi provisioning)?
Hi,
I have asked the respective team about this. I will get back to you on Monday.
Thanks.
BR
Kazi
Hi,
Ya sure
And can u please tell me this for nrf5340DK _nrf5340_cpuapp configuration
Wifi works in Thingy53 but for nrf5340 it is getting difficult to configure wifi
Hi,
I checked for the build configurations so right now I am able to build code but getting these errors on JLink viewer
[00:00:00.003,082] <inf> wifi_nrf: SPIM spi@a000: freq = 24 MHz
[00:00:00.003,112] <inf> wifi_nrf: SPIM spi@a000: latency = 1
[00:00:00.003,509] <err> wifi_nrf: hal_rpu_reg_read: Error !! Value read at addr_offset = 400 is = FFFFFFFF
[00:00:00.003,570] <err> wifi_nrf: hal_rpu_irq_enable: Reading from Root interrupt register failed
[00:00:00.003,601] <err> wifi_nrf: nrf_wifi_hal_dev_add: hal_rpu_irq_enable failed
[00:00:00.003,753] <err> wifi_nrf: nrf_wifi_fmac_dev_add: nrf_wifi_hal_dev_add failed
[00:00:00.003,784] <err> wifi_nrf: nrf_wifi_fmac_dev_add_zep: nrf_wifi_fmac_dev_add failed
[00:00:00.003,814] <err> wifi_nrf: nrf_wifi_if_init_zep: nrf_wifi_fmac_dev_add_zep failed
Hi,
I checked for the build configurations so right now I am able to build code but getting these errors on JLink viewer
[00:00:00.003,082] <inf> wifi_nrf: SPIM spi@a000: freq = 24 MHz
[00:00:00.003,112] <inf> wifi_nrf: SPIM spi@a000: latency = 1
[00:00:00.003,509] <err> wifi_nrf: hal_rpu_reg_read: Error !! Value read at addr_offset = 400 is = FFFFFFFF
[00:00:00.003,570] <err> wifi_nrf: hal_rpu_irq_enable: Reading from Root interrupt register failed
[00:00:00.003,601] <err> wifi_nrf: nrf_wifi_hal_dev_add: hal_rpu_irq_enable failed
[00:00:00.003,753] <err> wifi_nrf: nrf_wifi_fmac_dev_add: nrf_wifi_hal_dev_add failed
[00:00:00.003,784] <err> wifi_nrf: nrf_wifi_fmac_dev_add_zep: nrf_wifi_fmac_dev_add failed
[00:00:00.003,814] <err> wifi_nrf: nrf_wifi_if_init_zep: nrf_wifi_fmac_dev_add_zep failed
Hello,
I have feedback from team.
We are actually adding a way to do this over Wi-Fi, using the SoftAP mode. You can find it here https://github.com/nrfconnect/sdk-nrf/pull/14444