Hi
I use nRF7002-DK and sdk version as v2.5.2,download lesson8 exercise 3 solution and build was error as below log, which parts am I miss?
-- west build: generating a build system Loading Zephyr default modules (Zephyr base). -- Application: C:/ncs/ncs-inter/FOTA_BLE -- CMake version: 3.20.5 -- Found Python3: C:/ncs/toolchains/c57af46cb7/opt/bin/python.exe (found suitable version "3.8.2", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.5.2/zephyr/.cache -- Zephyr version: 3.4.99 (C:/ncs/v2.5.2/zephyr) -- Found west (found suitable version "1.1.0", minimum required is "0.14.0") -- Board: nrf7002dk_nrf5340_cpuapp -- Found host-tools: zephyr 0.16.1 (C:/ncs/toolchains/c57af46cb7/opt/zephyr-sdk) -- Found toolchain: zephyr 0.16.1 (C:/ncs/toolchains/c57af46cb7/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/c57af46cb7/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/ncs/v2.5.2/nrf/boards/arm/nrf7002dk_nrf5340/nrf7002dk_nrf5340_cpuapp.dts -- Found devicetree overlay: C:/ncs/ncs-inter/FOTA_BLE/app.overlay -- Found devicetree overlay: boards/nrf5340dk_nrf5340_cpuapp_ns.conf devicetree error: ./boards/nrf5340dk_nrf5340_cpuapp_ns.conf:1 (column 1): parse error: expected '/' or label reference (&foo) -- In: C:/ncs/ncs-inter/FOTA_BLE/build/zephyr, command: C:/ncs/toolchains/c57af46cb7/opt/bin/python.exe;C:/ncs/v2.5.2/zephyr/scripts/dts/gen_defines.py;--dts;C:/ncs/ncs-inter/FOTA_BLE/build/zephyr/zephyr.dts.pre;--dtc-flags;'-Wno-unique_unit_address_if_enabled';--bindings-dirs;C:/ncs/v2.5.2/nrf/dts/bindings;C:/ncs/v2.5.2/zephyr/dts/bindings;--header-out;C:/ncs/ncs-inter/FOTA_BLE/build/zephyr/include/generated/devicetree_generated.h.new;--dts-out;C:/ncs/ncs-inter/FOTA_BLE/build/zephyr/zephyr.dts.new;--edt-pickle-out;C:/ncs/ncs-inter/FOTA_BLE/build/zephyr/edt.pickle;--vendor-prefixes;C:/ncs/v2.5.2/nrf/dts/bindings/vendor-prefixes.txt;--vendor-prefixes;C:/ncs/v2.5.2/zephyr/dts/bindings/vendor-prefixes.txt CMake Error at C:/ncs/v2.5.2/zephyr/cmake/modules/dts.cmake:279 (message): gen_defines.py failed with return code: 1 Call Stack (most recent call first): C:/ncs/v2.5.2/zephyr/cmake/modules/zephyr_default.cmake:129 (include) C:/ncs/v2.5.2/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:66 (include) C:/ncs/v2.5.2/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate) CMakeLists.txt:9 (find_package) -- Configuring incomplete, errors occurred! FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\c57af46cb7\opt\bin\cmake.EXE' -DWEST_PYTHON=C:/ncs/toolchains/c57af46cb7/opt/bin/python.exe '-Bc:\ncs\ncs-inter\FOTA_BLE\build' -GNinja -DBOARD=nrf7002dk_nrf5340_cpuapp -DNCS_TOOLCHAIN_VERSION=NONE -DCONF_FILE=c:/ncs/ncs-inter/FOTA_BLE/prj.conf -DEXTRA_CONF_FILE=Kconfig -DEXTRA_DTC_OVERLAY_FILE=boards/nrf5340dk_nrf5340_cpuapp_ns.conf '-DBOARD_ROOT=c:/ncs/ncs-inter/inter_less5_exer1_solution;c:/ncs/ncs-inter/inter_less5_exer2_solution;c:/ncs/ncs-inter/jmex_spi_test;c:/ncs/ncs-inter/inter_less5_exer1_new;c:/ncs/ncs-inter/nrf5340_inter_less5_exer1_nrf5340;c:/ncs/ncs-inter/jmex_spi_stm_spi1;c:/ncs/ncs-inter/spi4_inter_less5_exer1_new_spi4;c:/ncs/ncs-inter/sp4_bmp280_spi4;c:/ncs/ncs-inter/sp4_lis2hh12_spi4;c:/ncs/ncs-inter/spi1_lis2hh12_spi1;c:/ncs/ncs-inter/spi4_bme280_cpuapp_spi4;c:/ncs/ncs-inter/spi4_stm32f412vgh6_cpuapp_spi4;c:/ncs/ncs-fund/fund_less5_exer1_uart_solution;c:/ncs/ncs-inter/uart0_stm32f412vgh6_uart0;c:/ncs/ncs-inter/spi4_stm32f412vgh6_3gpio_spi4;c:/ncs/ncs-inter/spi4_stm32f412vgh6_nodma_spi4;c:/ncs/ncs-inter/spi4_stm32f412vgh6_3gpio_uart_kthread_timer;c:/ncs/ncs-inter/fota_wifi;c:/ncs/ncs-inter/fota_ble' '-Sc:\ncs\ncs-inter\FOTA_BLE' * The terminal process terminated with exit code: 1. * Terminal will be reused by tasks, press any key to close it.
build config as below
Below error without include ovelay config
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:69:2: error: #error "No size specified. 'size' or 'size-in-bytes' must be set"
69 | #error "No size specified. 'size' or 'size-in-bytes' must be set"
| ^~~~~
In file included from C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain.h:50,
from C:/ncs/v2.5.2/zephyr/include/zephyr/sys/time_units.h:10,
from C:/ncs/v2.5.2/zephyr/include/zephyr/sys/util.h:615,
from C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:25,
from C:/ncs/v2.5.2/zephyr/include/zephyr/device.h:12,
from C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/flash.h:28,
from C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:10:
C:/ncs/v2.5.2/zephyr/include/zephyr/devicetree.h:333:40: error: expected ')' before 'DT_N_INST_0_nordic_qspi_nor_PATH'
333 | #define DT_INST(inst, compat) UTIL_CAT(DT_N_INST, DT_DASH(inst, compat))
| ^~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/toolchain/gcc.h:81:60: note: in definition of macro 'BUILD_ASSERT'
81 | #define BUILD_ASSERT(EXPR, MSG...) _Static_assert(EXPR, "" MSG)
| ^~~
110 | _CONCAT(__pinctrl_states, DEVICE_DT_NAME_GET(node_id))
| ^~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:171:9: note: in expansion of macro 'Z_PINCTRL_STATES_NAME'
171 | Z_PINCTRL_STATES_NAME(node_id)[] = { \
| ^~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/include/zephyr/drivers/pinctrl.h:242:9: note: in expansion of macro 'Z_PINCTRL_STATES_DEFINE'
242 | Z_PINCTRL_STATES_DEFINE(node_id) \
| ^~~~~~~~~~~~~~~~~~~~~~~
C:/ncs/v2.5.2/zephyr/drivers/flash/nrf_qspi_nor.c:1494:1: note: in expansion of macro 'PINCTRL_DT_DEFINE'
1494 | PINCTRL_DT_DEFINE(QSPI_NODE);
| ^~~~~~~~~~~~~~~~~
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\c57af46cb7\opt\bin\cmake.EXE' --build 'c:\ncs\ncs-inter\FOTA_BLE\build'
[96/304] Building C object zephyr/CMakeFiles/zephyr.dir/lib/os/heap.c.obj
FAILED: modules/mcuboot/mcuboot_subimage-prefix/src/mcuboot_subimage-stamp/mcuboot_subimage-build mcuboot/zephyr/zephyr.hex mcuboot/zephyr/zephyr.elf
cmd.exe /C "cd /D C:\ncs\ncs-inter\FOTA_BLE\build\mcuboot && C:\ncs\toolchains\c57af46cb7\opt\bin\cmake.exe --build . --"
ninja: build stopped: subcommand failed.
build config as below
Best Regards
Tina
