• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 73 subscribers
  • Views 1607 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 111239
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to connect multiple peripheral interface on one device?

JOHN

Hi everyone.

I used sdk v10.0.0 and softdevice s130. I want to make peripheral device with nRF51422. This peripheral device have to configured with diffent peripheral interface(TWI, SPI). How to connect the two peripheral interface at the same time on one device? If this is possible, how must I configure.

Thank you.

Parents
  • 0

    yes it's possible. You can connect to any pins you like which aren't already used by something else and then assign the pins in the driver. The nordic chips allow you to use any available pin on the device on their hardware interfaces (most of them at least, there are a few restrictions on things like the Analog in). So as long as the pins are unused by other things, you can use them.

Reply
  • 0

    yes it's possible. You can connect to any pins you like which aren't already used by something else and then assign the pins in the driver. The nordic chips allow you to use any available pin on the device on their hardware interfaces (most of them at least, there are a few restrictions on things like the Analog in). So as long as the pins are unused by other things, you can use them.

Children
No Data
Related
Terms of service