Thingy 53 Flash example code

[mg Jeong]

hello.
I developed and tested the ncs/nrf/sample/bluetooth/multiple_adv_sets example using the nrf5340 DK board to suit my requirements.
I want to run the source by inserting it into the thingy53 board.
I connected the jlink cable from the nrf5340 dk board and completed writing to the thingy 53 board, but I can't check the BLE data or even the log data.
I would like to inquire whether a separate bootloader must be installed on Thingy53 for it to work.

[Menon]

Hello,

Could you send me a picture of how you are connecting the Thingy53? Are you saying that you are using the nRF5340 as an external debugger for the Thingy53? Which SDK version are you using?

You might already know this, but just to confirm: the Thingy53 does not come with an onboard debugger. Please see the section on Devloping with thingy53.

Kind regards,

Abhijith

[mg Jeong]

hello.
ncs sdk: 2.6 ver

I confirmed that it can flash by connecting as shown in the image below. 


After debugging, I confirmed that logs were recorded. 

I'm trying to use nvs on thingy53, but the module seems to keep crashing during this process.

Regarding thingy 53, if you have any nvs-related example code, please let me know.

If you have basic example code, please forward it to me.

thank you

[Menon]

Hello,

Good to hear that you are able to program the Thingy:53. For the NVS sample, you can refer to the NVS sample from Zephyr. See this page.

Kind Regards,

Abhijith