Need help connecting to MQTT using nRF9160

[pranav-ether]

I can't figure out what I'm missing. I'm not able to send messages using MQTT.

Here's the link to my code: https://github.com/pranav-ether/test/tree/main/mqtt_pub

This are the logs:

[00:02:58.031,768] <inf> LTE: Network registration status: Connected - home network
[00:02:58.031,890] <inf> LTE: Connected to LTE network
[00:02:58.031,921] <inf> LTE: ====== Cell Network Info ======
[00:02:58.033,477] <inf> LTE: Signal strength: 42
[00:02:58.034,210] <inf> LTE: Current LTE band: 8
[00:02:58.034,912] <inf> LTE: Supported LTE bands: (1,2,3,4,5,8,12,13,17,19,20,25,26,28,66)
[00:02:58.035,705] <inf> LTE: Tracking area code: 8CA1
[00:02:58.036,468] <inf> LTE: Current mode: 0
[00:02:58.037,200] <inf> LTE: Current operator name: 65501
[00:02:58.038,146] <inf> LTE: Cell ID of the device: 0E446D21
[00:02:58.039,337] <inf> LTE: IP address of the device: 100.67.202.179
[00:02:58.039,886] <inf> LTE: Modem firmware version: mfw_nrf9160_1.3.5
[00:02:58.040,618] <inf> LTE: LTE-M support mode: 0
[00:02:58.041,259] <inf> LTE: NB-IoT support mode: 1
[00:02:58.041,900] <inf> LTE: GPS support mode: 0
[00:02:58.042,633] <inf> LTE: Mobile network time and date: 24/08/13,06:33:37+08
[00:02:58.042,633] <inf> LTE: ===============================
[00:02:58.043,121] <inf> MQTT: Connection to broker using mqtt_init
[00:04:23.972,839] <err> mqtt_helper: Cloud MQTT keepalive ping failed: -128

[Charlie]

It should look like this.

mosh:~$ > at AT+CFUN=1
at AT+CFUN=1
OK

PDN event: PDP context 0 activated
PDN event: PDP context 0 IPv6 up
mosh:~$ > at AT%CONEVAL
at AT%CONEVAL
%CONEVAL: 0,1,9,73,15,34,"03238D05","24201",457,6400,20,0,0,-13,1,1,88
OK

mosh:~$ > at AT%CONEVAL
at AT%CONEVAL
%CONEVAL: 0,1,7,73,11,26,"03238D05","24201",457,6400,20,0,0,-13,1,1,88
OK

Best regards,

Charlie

[pranav-ether]

When using RTT shell this is all I get, after this it crashes. When I hit the Enter key after the last command, the shell closes automatically. I have tried this multiple times, always crashes after this point. This might have caused RTT logs to fail. How to fix that?

rtt:~$ at AT+CGMR
mfw_nrf9160_1.3.6
OK

rtt:~$ Modem domain event: Search done
Network registration status: unknown
LTE cell changed: ID: -1, Tracking area: -1

rtt:~$ 
rtt:~$ at AT+CFUN=4
Network registration status: not registered
OK

rtt:~$ at AT%XSYSTEMMODE=0,1,0,0
OK

rtt:~$ at AT+CFUN=1
OK

rtt:~$ at AT+CGDCONT?
OK

rtt:~$ at AT%CONEVAL
%CONEVAL: 1
OK

rtt:~$ Network registration status: searching
Currently active system mode: NB-IoT
LTE cell changed: ID: 279440, Tracking area: 49173