Problem with the bootloader start adress

[Pavan kumar]

Hii all I am trying to run bootloader_signing example from the gcc. Nordic already gave an example for Keil I wanted to port the same thing for gcc. But its not working, On verifcation I come to notice that there is problem with the start address of bootloader even though I changed in the linker script I'm attching my results Test results.rar I'm unable to find where the problem was. I am using nrf51 dk board and SDK9.0.0 can any one help me in this regards and this is the linker script that I'm using dfu_gcc_nrf51.ld

[[Florian]]

Hi,

I have a similar issue. After changing the linker script and adding the macro SIGNING to the makefile is was able to launch the signing bootloader. But when I try to upload the new firmware 'dfu_init_prevalidate' always returns NRF_ERROR_SVC_HANDLER_MISSING. I tried SDK v10 and v11 but the problem stays the same.

I used the following commands to flash the code

nrfjprog -e
nrfjprog --program s110_nrf51_8.0.0_softdevice.hex
nrfjprog --program nrf51422_xxac_s110.hex
nrfjprog --program nrf_sec.hex

[Pavan kumar]

Still confused do you talking about the file SDK\examples\dfu\experimental\bootloader_signing\dfu_ble_svc.c there is no implementation for void attribute (( naked )) Security_SVC_Handler(void) under #elif defined ( GNUC ) right? its only implemented under #if defined ( __CC_ARM ) as __asm void Security_SVC_Handler(void). If yes can you please share that .c file by just highlighting Security_SVC_Handler